The PIXCI SV5 has one S-Video jack and two BNC jacks for multiplexed video input.

Requires SVID-4DINP-6FT (S-Video) or BNCP-BNCP-6FT (BNC) cable for each video input.

Optionally uses DB15-2-BNCP-6FT cable for TTL inputs and outputs.

The PIXCI SV5A has three BNC jacks for multiplexed video input.

Requires BNCP-BNCP-6FT (BNC) cable for video input.

Optionally uses DB15-2-BNCP-6FT cable for TTL inputs and outputs.

The PIXCI SV5B has one video input with two common BNC jacks for video loop-through.

Includes Full Height Bracket. Optionally order OPT-LPBRKT-SV5B to substitute Low Profile Bracket.

The PIXCI SV5L has one female S-Video connector, and two Mini BNC jacks for multiplexed video input.

Requires SVID-4DINP-6FT (S-Video) or MBNCP-BNCP-6FT (Mini BNC) cable for video input.

Includes Low Profile Bracket; optionally order OPT-FHBRKT-SV5L to substitute Full Height Bracket.

The PIXCI SV5 has one S-Video jack and two BNC jacks for multiplexed video input; Odd/even sync on Strobe Out pin.

Requires SVID-4DINP-6FT (S-Video) or BNCP-BNCP-6FT (BNC) cable for each video input.

Optionally uses DB15-2-BNCP-6FT cable for TTL inputs and outputs.

Provides one BNC jack for each of the two, independent, video inputs.

Requires one BNCP-BNCP-6FT (BNC) cable for each video input.

Includes Full Height Bracket; optionally order OPT-LPBRKT-SV7 to substitute Low Profile Bracket.

The PIXCI SV8 has one S-Video jack and four high density BNC jacks for multiplexed video input.

Requires an S-Video cable, or HDBNC to BNC HDBNCP-BNCP-2M cable(s).

Includes Full Height Bracket; optionally order OPT-LPBRKT-SV8 to substitute Low Profile Bracket.

Provides one BNC jack for monochrome video.

Includes Full Height Bracket. Optionally order OPT-LPBRKT-A110 to substitute Low Profile Bracket.

Requires one BNCP-BNCP-6FT (BNC) cable for the BNC video input.

Optionally use DB15-2-BNCP-6FT cable for TTL inputs and outputs.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs; Strobe and General Purpose Outputs.

Provides three BNC jacks and a DB15 for monochrome or component RGB VIDEO, and H & V inputs.

Requires one BNCP-BNCP-6FT (BNC) cable for each BNC video input.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs; Strobe and General Purpose Outputs.

Provides access to one TTL general purpose input and one TTL general purpose output on PIXCI-SV5.

Provides access to one LVTTL general purpose input and one LVTTL general purpose output on PIXCI-A110.

Same as the default bracket provided with PIXCI-A110.

Same as the default bracket provided with PIXCI-SV5B.

No charge if board is purchased with full height bracket installed (request option at time of order). Charge applies if bracket is purchased separately or in addition to the low profile bracket.

Same as the default bracket provided with PIXCI-SV7.

Same as the default bracket provided with PIXCI-SV8.

No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.

No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.

Sames as the default bracket provided with PIXCI-SV5L.

No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.

No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices NITROGEN6 (ARM imx6).

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Lite supports all PIXCI® imaging boards.

Single user license.

The XCAP-Lite is provided free-of-charge with purchase of any PIXCI® imaging board.

Software downloadable; CD available upon request. (Versions for TX1/TX2/A57, TK1/A15, or NITROGEN6/imx6 only downloadable).

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Ltd supports all PIXCI® imaging boards.

The XCAP-Ltd includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Std supports all PIXCI® imaging boards.

The XCAP-Std includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under 64 bit Windows (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

XCLIB-Lite is limited to using no more than 64 MB of memory for video frame buffers, and is limited to operating only one PIXCI® imaging board and one camera.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.