EPIX® Imaging Products Price List - Effective Date: 31 Jan 2024

EPIX® Price List - Effective Date: 31 Jan 2024

SILICON VIDEO® Camera Link® Cameras and PIXCI® Hardware

ORDER CODE	DESCRIPTION	UNIT PRICE

^{SILICON VIDEO® Camera Link® PoCL Cameras}

SV10C-CL SILICON VIDEO® 10C-CL Color Camera Link® PoCL Camera - 3840x2764, 7.5 fps, 12 bit Details... $690.00

^{Camera supports Power over Camera Link (PoCL); for use with PIXCI-EB1P, PIXCI-E8, PIXCI-E4(Rev 4 & later) or other PoCL frame grabber, not included.
Camera also accepts external power, order PWR-SV1820CL, for use with any Camera Link frame grabber.
Requires CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M data cable.
Options available: (A) Order SV-OPT-MNTNOF extra lens mount without IR cut filter to maximize camera's infrared sensitivity, (B) Order LENS-16MM-1.4 C-Mount lens.
Other lenses available.}

SV10M-CL SILICON VIDEO® 10M-CL Monochrome Camera Link® PoCL Camera - 3840x2764, 4.25 fps, 12 bit Details... $881.00

^{Camera supports Power over Camera Link (PoCL); for use with PIXCI-EB1P, PIXCI-E8, PIXCI-E4(Rev 4 & later) or other PoCL frame grabber, not included.
Camera also accepts external power, order PWR-SV1820CL, for use with any Camera Link frame grabber.
Requires CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M data cable.
Options available: (A) Order SV-OPT-MNTIRCF for extra lens mount with IR cut filter to reduce infrared sensitivity, (B) Order LENS-16MM-1.4 C-Mount lens.
Other lenses available.}

SV1514CL SILICON VIDEO® 1514CL Color Camera Link® POCL Camera - 4608x3288, Full/80-Bit mode & Base mode, 8 bit @ 20.5 fps, 10 bit @ 17 fps, 12 bit @ 14.5 fps Details... $826.00

^{For use with PIXCI-E4G2, PIXCI-E8, PIXCI-E104X4-2F or PIXCI-E4 frame grabbers in 8-bit/8-tap, or 10-bit/8-tap modes; requiring two CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M data cables.
For use with PIXCI-EB1MINI, PIXCI-EB1MINI-H, PIXCI-EB1MINI-G-S, PIXCI-EB1MINI-G-M, PIXCI-EB1MINI-F-S, PIXCI-EB1MINI-F-M, PIXCI-EC1, or PIXCI-ECB1-34 frame grabbers in 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requiring one CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, or CBL-MCLM-5M data cable.
For use with PIXCI-EB1, PIXCI-EB1P, PIXCI-E104X4-4B, PIXCI-E4G2, PIXCI-E8, or PIXCI-EL1 frame grabbers in 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requires one CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, or CBL-MCL-5M data cable.
Order PWR-SV1514CL Power Supply if not used with a Power Over Camera Link (POCL) frame grabber.
Order SV-OPT-MNTNOF extra lens mount without IR cut filter to maximize camera's infrared sensitivity.
Lens Optional; C-Mount lenses optionally available for all applications.}

SV1820CL SILICON VIDEO® 1820CL Color Camera Link® Camera - 4912x3684, 8/10/12 bit, 24 fps in Full/80-Bit mode, 8.5 fps in Base mode Details... $875.00

^{For use with PIXCI-E4G2, PIXCI-E8, PIXCI-E104X4-2F or PIXCI-E4 frame grabbers in 24 fps @ 8-bit/8-tap, or 10-bit/8-tap modes; requiring two CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M data cables.
For use with PIXCI-EB1MINI, PIXCI-EB1MINI-H, PIXCI-EB1MINI-G-S, PIXCI-EB1MINI-G-M, PIXCI-EB1MINI-F-S, PIXCI-EB1MINI-F-M, PIXCI-EC1, or PIXCI-ECB1-34 frame grabbers in 8.5 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requiring one CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, or CBL-MCLM-5M data cable.
For use with PIXCI-EB1, PIXCI-E104X4-4B, PIXCI-E4G2, PIXCI-E8, or PIXCI-EL1 frame grabbers in 8.5 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requires one CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, or CBL-MCL-5M data cable.
Order PWR-SV1820CL Power Supply.
Order SV-OPT-MNTNOF extra lens mount without IR cut filter to maximize camera's infrared sensitivity.
Lens Optional; C-Mount lenses optionally available for all applications.}

^{SILICON VIDEO® Camera Link® non-PoCL Cameras}

SV20C-CL SILICON VIDEO® 20C-CL Color Camera Link® Camera - 5120x3840, 8/10/12 bit 25 fps in Full/80-Bit mode, 8/10 bit 30 fps in Full-Bit mode, 8/10/12 bit 8.1 fps in Base mode, Global Shutter Details... $7145.00

^{For use with PIXCI-E4G2, PIXCI-E8, or PIXCI-E4 frame grabbers in 25 fps @ 8-bit/8-tap, 10-bit/8-tap, or 12-bit/6.6-tap modes; requiring two CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M data cables.
For use with PIXCI-E4G2, PIXCI-E8, or PIXCI-E4 frame grabbers in 30 fps @ 8-bit/8-tap, or 10-bit/8-tap modes; requiring two CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M data cables.
For use with PIXCI-EB1MINI, PIXCI-EC1, or PIXCI-ECB1-34 frame grabbers in 8.1 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requiring one CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, or CBL-MCL-5M data cable.
For use with PIXCI-EB1, or PIXCI-EL1 frame grabbers in 8.1 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requires one CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, or CBL-CL-5M data cable.
Options available: (A) Order PWR-SV20X-CL Power Supply, (B) Order IR Cut filter SV20-OPT-IRCF to reduce infrared sensitivity and improve color saturation, (C) Order Tripod Mount SV20-OPT-TM.
Lens not included; F-Mount lenses optionally available for all applications.}

SV20M-CL SILICON VIDEO® 20M-CL Monochrome Camera Link® Camera - 5120x3840, 8/10/12 bit 25 fps in Full/80-Bit mode, 8/10 bit 30 fps in Full-Bit mode, 8/10/12 bit 8.1 fps in Base mode, Global Shutter Details... $6815.00

^{For use with PIXCI-E4G2, PIXCI-E8, or PIXCI-E4 frame grabbers in 25 fps @ 8-bit/8-tap, 10-bit/8-tap, or 12-bit/6.6-tap modes; requiring two CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M data cables.
For use with PIXCI-E4G2, PIXCI-E8, or PIXCI-E4 frame grabbers in 30 fps @ 8-bit/8-tap, or 10-bit/8-tap modes; requiring two CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M data cables.
For use with PIXCI-EB1MINI, PIXCI-EC1, or PIXCI-ECB1-34 frame grabbers in 8.1 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requiring one CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, or CBL-MCL-5M data cable.
For use with PIXCI-EB1, or PIXCI-EL1 frame grabbers in 8.1 fps @ 8-bit/2-tap, 10-bit/2-tap, or 12-bit/2-tap modes; requires one CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, or CBL-CL-5M data cable.
Options available: (A) Order PWR-SV20X-CL Power Supply, (B) Order IR Cut filter SV20-OPT-IRCF to reduce infrared sensitivity, (C) Order Tripod Mount SV20-OPT-TM.
Lens not included; F-Mount lenses optionally available for all applications.}

^{PIXCI® Camera Link Hardware w. PoCL for PCI Express}

PIXCI-EB1P PIXCI® EB1-PoCL PCI Express x1 Frame Grabber for Camera Link® PoCL or non-PoCL camera in Base mode Details... $450.00

^{Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Includes Full Height Bracket. Optionally order OPT-LPBRKT-EB1 to substitute Low Profile Bracket.
Optionally add PRESET-EB1P order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1P default configuration and enable camera specific features.}

PIXCI-EB1G2P PIXCI® EB1-PoCL PCI Express x1 gen 2 Frame Grabber for Camera Link® PoCL or non-PoCL camera in Base mode Details... $600.00

PIXCI-E4 PIXCI® E4 PCI Express x4 Frame Grabber for Camera Link® PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera) Details... $979.00

^{Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.
Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types).
In dual Base mode software identifies as PIXCI® E4DB; replaces previous PIXCI® E4DB product.
Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for Medium, Full, or 80 Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E4 default configuration and enable camera specific features.}

PIXCI-E8 PIXCI® E8 PCI Express x8 Frame Grabber for Camera Link® PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera) Details... $1275.00

^{Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.
Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support up to two Base Camera Link mode cameras (of same or different types).
In dual Base mode software identifies as PIXCI® E8DB.
Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for each Medium, Full, or 80 Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E8 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E8 default configuration and enable camera specific features.}

^{PIXCI® Camera Link Hardware w/out PoCL for PCI Express}

PIXCI-ECB1-34 PIXCI® ECB1-34 ExpressCard/34 Frame Grabber for Camera Link® camera in Base mode Details... $655.00

^{For use in a notebook/laptop computer with an ExpressCard/34 or ExpressCard/54 slot.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable.
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable.
Optionally order CBL-ECB134-TS-25CM cable for TTL Trigger Input and TTL Strobe Output. (Factory installed option available at time of purchase.).
Optionally order OPT-EC-EMI for additional EMI shielding. (Factory installed option available at time of purchase.).
Optionally add PRESET-ECB1-34 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® ECB1-34 default configuration and enable camera specific features.}

PIXCI-ECB2 PIXCI® ECB2 ExpressCard/54 Frame Grabber for Camera Link® camera(s) in Base mode (dual) Details... $710.00

^{For use in a notebook/laptop computer with an ExpressCard/54 slot.
Utilizes one Camera Link cable for each Base configuration camera.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Optionally order up to four CBL-ECB2-TS-1M cables for TTL Trigger Input(s) or TTL Strobe Output(s).
Optionally order OPT-EC-EMI for additional EMI shielding. (Factory installed option available at time of purchase.).
Optionally add PRESET-ECB2 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® ECB2 default configuration and enable camera specific features.}

PIXCI-EB1 PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode Details... $425.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Includes High Profile bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Alternately, order PIXCI-EB1-LP for same card w. Low Profile Bracket w/out DB-9 connector.
Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket w/out DB-9 connector.
Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.}

PIXCI-EB1-LP PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode, with Low Profile Bracket Details... $395.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Includes Low Profile Bracket w/out DB-9 connector. Order PIXCI-EB1 for version with Full Height Bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.
Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.}

PIXCI-EB1-NDB9 PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode, w/out DB-9 Connector Details... $395.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket (replacement done at factory if ordered with PIXCI-EB1-NDB9).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.
Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.}

PIXCI-EB1G2 PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode Details... $595.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Includes High Profile bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Alternately, order PIXCI-EB1G2-LP for same card w. Low Profile Bracket w/out DB-9 connector.
Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket w/out DB-9 connector.}

PIXCI-EB1G2-LP PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode, with Low Profile Bracket Details... $550.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Includes Low Profile Bracket w/out DB-9 connector. Order PIXCI-EB1G2 for version with Full Height Bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.}

PIXCI-EB1G2-NDB9 PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode, w/out DB-9 Connector Details... $550.00

PIXCI-EL1 PIXCI® EL1 PCI Express x1 Frame Grabber for Camera Link® camera in Base, Medium, Full modes and in Base mode (single or dual camera) Details... $959.00

^{Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.
Switchable to support either one Base, Medium or Full Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types).
In dual Base mode software identifies as PIXCI® EL1DB; replaces previous PIXCI® EL1DB product.
Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for Medium, Full, or 80 Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.
Optionally add PRESET-EL1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EL1 default configuration and enable camera specific features.}

PIXCI-E4G2 PIXCI® E4G2 PCI Express x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode, or one to four cameras in Base mode Details... $1275.00

^{Switchable to support either two Base, Medium, Full or 80-Bit Camera Link mode cameras; or to support up to four Base Camera Link mode cameras (of same or different types).
Provides first and second Camera Link MDR Connectors on bracket - for two Base mode cameras or one Medium, Full, 80-Bit mode camera; provides third and fourth Camera Link MDR Connectors on PCB - for two Base mode cameras or one Medium, Full, 80-Bit mode camera. Use of extension cables to access third and fourth Camera Link MDR Connectors is recommended, especially with smaller PC motherboards; optionally order OPT-FHBRKT-CL-2MDR for an additional bracket with third and fourth Camera Link MDR Connectors with extension cables from the PCB mounted Camera Link MDR Connectors.
Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for each Medium, Full, or 80 Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E4G2 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E4G2 default configuration and enable camera specific features.}

^{PIXCI® EB1mini Camera Link Hardware w/out PoCL for PCI Express Mini}

PIXCI-EB1MINI PIXCI® EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link® Details... $395.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Available without SDR connector for custom cable attachment.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-F-M PIXCI® EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $575.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-F-M-I PIXCI® EB1miniF-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $645.00

^{Extended temperature range of -40c to +80c for industrial use.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-F-S PIXCI® EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $575.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-F-S-I PIXCI® EB1miniF-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $645.00

^{Extended temperature range of -40c to +80c for industrial use.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-GC-M PIXCI® EB1miniGC-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 15.24 cm long cable Details... $450.00

^{Base camera link frame grabber plugs into a mini PCI express card slot and uses a very flexible Samtec cable to connect to the MDR connector PCB.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-GC-S PIXCI® EB1miniGC-S PCI Express Mini Card two board Frame Grabber with CL(SDR) connector for Base Camera Link®, attached with 15.24 cm long cable Details... $475.00

^{Base camera link frame grabber plugs into a mini PCI express card slot and uses a very flexible Samtec cable to connect to the SDR connector PCB.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-G-M PIXCI® EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 30 cm long cable Details... $420.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-GM-M PIXCI® EB1miniGM-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $420.00

^{Base camera link frame grabber plugs into a mini PCI express card slot and uses a low profile Molex flat cable for height constrained systems. MDR connector.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-GM-S PIXCI® EB1miniGM-S PCI Express Mini Card two board Frame Grabber with CL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable Details... $420.00

^{Base camera link frame grabber plugs into a mini PCI express card slot and uses a low profile Molex flat cable for height constrained systems. SDR connector.
Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-H PIXCI® EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 cm long cable Details... $480.00

^{Utilizes one Camera Link cable for Base configuration.
For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).
Contact EPIX, Inc. for other connection and cabling options.
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.}

PIXCI-EB1MINI-H-I PIXCI® EB1miniH Industrial PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 cm long cable Details... $517.00

PIXCI-EB1MINI-I PIXCI® EB1mini Industrial PCI Express Mini Card Frame Grabber for Base Camera Link® Details... $495.00

^{PIXCI® miniH2 Camera Link Hardware w. PoCL for PCI Express Mini and for M.2}

MINIH2B PIXCI® miniH2B PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® cameras, Dual Base Details... $755.00

^{Dual Base Camera Link frame grabber uses a half mini PCI express, an M.2 Key E or M.2 Key M slot.
Logic card has two Camera Link® MDR or SDR connectors; a flat cable connects to half size mPCIe or M.2 Bus Card.
Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.
Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.
Utilizes one Camera Link Connector Card each Base configuration camera. Must select one Camera Link Connector 0:
MH2-CLC0-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-SDR selects SDR for Camera Link connector 0.
May also select one Camera Link Connector 1:
MH2-CLC1-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-SDR selects SDR for Camera Link connector 1.
Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.
See MH2-CLC0-MDR, MH2-CLC0-SDR, MH2-CLC1-MDR, or MH2-CLC1-SDR for suggested Camera Link cables.}

MINIH2BL PIXCI® miniH2BL PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® cameras, Dual Base Details... $775.00

^{Dual Base Camera Link frame grabber uses a half mini PCI express, an M.2 Key E or M.2 Key M slot.
Logic card utilizes two flexible cables connect to Camera Link® MDR or SDR Connector Cards; a flat cable connects to half size mPCIe or M.2 Bus Card.
Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.
Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.
Utilizes one Camera Link Connector Card each Base configuration camera. Must select one Camera Link Connector 0 Card:
MH2-CLC0-06.00-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-06.00-SDR selects SDR for Camera Link connector 0.
MH2-CLC0-06.00-SDRP selects cable with SDR Plug for Camera Link connector 0.
May also select one Camera Link Connector 1 Card:
MH2-CLC1-06.00-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-06.00-SDR selects SDR for Camera Link connector 1.
MH2-CLC1-06.00-SDRP selects cable with SDR Plug for Camera Link connector 1.
Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.
See MH2-CLC0-06.00-MDR, MH2-CLC0-06.00-SDR, MH2-CLC1-06.00-MDR, or MH2-CLC1-06.00-SDR for suggested Camera Link cables.}

MINIH2F PIXCI® miniH2F PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $755.00

^{Base/Medium/Full/80-Bit mode camera link frame grabber uses a half mini PCI express, an M.2 Key E, or M.2 Key M slot.
Logic card has two Camera Link® MDR or SDR connectors; utilizes a flat cable connects to half size mPCIe or M.2 Bus Card.
Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.
Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.
Utilizes one or two Camera Link cables for the camera. Must select one Camera Link Connector 0:
MH2-CLC0-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-SDR selects SDR for Camera Link connector 0.
May also select one Camera Link Connector 1:
MH2-CLC1-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-SDR selects SDR for Camera Link connector 1.
Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.
See MH2-CLC0-MDR, MH2-CLC0-SDR, MH2-CLC1-MDR, or MH2-CLC1-SDR for suggested Camera Link cables.}

MINIH2FL PIXCI® miniH2FL PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $775.00

^{Base/Medium/Full/80-Bit mode Camera Link frame grabber uses a half mini PCI express, an M.2 Key E, or M.2 Key M slot.
Logic card has two flexible cables to connect to Camera Link® MDR or SDR Connector Cards; utilizes a flat cable connects to half size mPCIe or M.2 Bus Card.
Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.
Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.
Utilizes one or two Camera Link cables for the camera. Must select one Camera Link Connector 0 Card:
MH2-CLC0-06.00-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-06.00-SDR selects SDR for Camera Link connector 0.
MH2-CLC0-06.00-SDRP selects cable with SDR Plug for Camera Link connector 0.
May also select one Camera Link Connector 1 Card:
MH2-CLC1-06.00-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-06.00-SDR selects SDR for Camera Link connector 1.
MH2-CLC1-06.00-SDRP selects cable with SDR Plug for Camera Link connector 1.
Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.
See MH2-CLC0-06.00-MDR, MH2-CLC0-06.00-SDR, MH2-CLC1-06.00-MDR, or MH2-CLC1-06.00-SDR for suggested Camera Link cables.}

MH2-GRADE-I Industrial Temperature Grade Option for miniH2 Frame Grabber Logic Card $138.00

MH2-GRADE-A Automotive Temperature Grade Option for miniH2 Frame Grabber Logic Card $165.00

MH2-BUS-06.00-MPCIE Bus Card for miniH2 Frame Grabber, half mini PCIe Bus Card attached with 6 inch cable $159.00

MH2-BUS-06.00-M2E Bus Card for miniH2 Frame Grabber, M.2 Key E Bus Card attached with 6 inch cable $159.00

MH2-BUS-06.00-M2M Bus Card for miniH2 Frame Grabber, M.2 Key M Bus Card attached with 6 inch cable Details... $159.00

^{Not for use with MINIH2X4F .}

MH2-BUS-08.00-M2M4 Bus Card for miniH2x4 Frame Grabber, M.2 Key M Bus Card attached with 8 inch cable $159.00

MH2-CLC0-06.00-MDR MDR Camera Link Connector Card 0 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $159.00

^{For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).}

MH2-CLC0-06.00-SDR SDR Camera Link Connector Card 0 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $174.00

^{For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).}

MH2-CLC0-06.00-SDRP SDR Plug Camera Link Connector Card 0 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $275.00

^{Connects directly on cameras with MiniCL(SDR) connectors.}

MH2-CLC1-06.00-MDR MDR Camera Link Connector Card 1 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $159.00

MH2-CLC1-06.00-SDR SDR Camera Link Connector Card 1 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $174.00

MH2-CLC1-06.00-SDRP SDR Plug Camera Link Connector Card 1 for miniH2 Frame Grabber, Connector Card attached with 6 inch cable Details... $275.00

^{Connects directly on cameras with MiniCL(SDR) connectors.}

MH2-CLC0-MDR MDR Camera Link Connector 0 for miniH2 Frame Grabber, MDR Connector Details... $25.00

MH2-CLC0-SDR SDR Camera Link Connector 0 for miniH2 Frame Grabber, SDR Connector Details... $50.00

MH2-CLC1-MDR MDR Camera Link Connector 1 for miniH2 Frame Grabber, MDR Connector Details... $25.00

MH2-CLC1-SDR SDR Camera Link Connector 1 for miniH2 Frame Grabber, SDR Connector Details... $50.00

^{PIXCI® miniH2X4F Hardware for Camera Link for M.2}

MINIH2X4F PIXCI® miniH2x4F PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $655.00

^{Base/Medium/Full/80-Bit mode camera link frame grabber uses an M.2 Key M slot.
Logic card has two Camera Link® MDR or SDR connectors; a flat cable connects to M.2 Bus Card.
Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.
Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.
Utilizes one or two Camera Link cables for the camera. Must select Camera Link Connectors:
miniH2x4F-M selects MDR for Camera Link connectors.
miniH2x4F-S selects SDR for Camera Link connectors.
Must select one Bus Card and cable:
MH2X4-BUS-M2M selects an M.2 Key M Bus Card;
CBL-ECUE-20CM selects a 20 cm cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2X4F-GRADE-A for automotive temperature grade, -40 to +105C.
MH2X4F-GRADE-I for industrial temperature grade, -40 to +80C.
See MINIH2X4F-M, or MINIH2X4F-S for suggested Camera Link cables.}

MH2X4-BUS-M2M Bus Card for miniH2X4F Frame Grabber, M.2 M Key Bus Card for the miniH2X4F $88.00

MH2X4F-GRADE-I Industrial Temperature Grade Option for miniH2X4F Frame Grabber Logic Card $138.00

MH2X4F-GRADE-A Automotive Temperature Grade Option for miniH2X4F Frame Grabber Logic Card $165.00

MINIH2X4F-M MDR Camera Link Connector for miniH2X4F Frame Grabber, MDR Connector Details... $22.00

MINIH2X4F-S SDR Camera Link Connector for miniH2X4F Frame Grabber, SDR Connector Details... $56.00

CBL-ECUE-20CM 20 cm cable connects the miniH2x4F to M.2 M Key Bus Card Details... $100.00

^{For use with miniH2x4F.}

^{PIXCI® mf2280 Hardware for Camera Link for Thunderbolt}

MF2280-C PIXCI® mf2280 Thunderbolt 3 Frame Grabber with enclosure for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $1315.00

^{Includes 20 inch Thunderbolt cable.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).}

^{PIXCI® mf2280 Camera Link Hardware w. PoCL for M.2}

MF2280 PIXCI® mf2280 w/PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $695.00

^{Base/Medium/Full/80-Bit mode camera link frame grabber uses an M.2 Key M slot.
Logic card has one flexible cable to connect to Camera Link® MDR or SDR Connector Card.
Utilizes one or two Camera Link cables for the camera. Must select Camera Link Connectors:
MFMS-M selects MDR for Camera Link connectors.
MFMS-S selects SDR for Camera Link connectors.
Must select cable connecting the Logic Card to the Connector Card:
CBL-HLCD2006TR-6 selects a 6 inch cable.
Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MF2280-GRADE-A for automotive temperature grade, -40 to +105C.
MF2280-GRADE-I for industrial temperature grade, -40 to +80C.
See MFMS-M, or MFMS-S for suggested Camera Link cables.
See CBL-MFMS-POCL-6 to insert external 12V DC as camera power (PoCL).}

MF2280+ PIXCI® mf2280+ w/PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode Details... $865.00

MFMS-M MDR Camera Link Connectors for mf2280 Frame Grabber, MDR Connector Details... $112.00

MFMS-S SDR Camera Link Connectors for mf2280 Frame Grabber, SDR Connector Details... $135.00

MF2280-GRADE-A Automotive Temperature Grade Option for mf2280 or mf2208+ Frame Grabber Logic Card $165.00

MF2280-GRADE-I Industrial Temperature Grade Option for mf2280 or mf2208+ Frame Grabber Logic Card $138.00

CBL-HLCD2006TR-6 Cable connecting the mf2280 to mfMS CameraLink Card, 6 inches long Details... $147.00

^{For use with MF2280.}

CBL-MFMS-POCL-6 mfMS 12v PoCL Cable Details... $22.00

^{For use with MFMS-M or MFMS-S.
Requires external 12V DC supply for PoCL power.}

^{PIXCI® Camera Link Hardware for PCIe/104 x4}

PIXCI-E104X4-2F PIXCI® e104x4-2f PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode Details... $1755.00

^{Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for Medium, Full, or 80-Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-2f default configuration and enable camera specific features.}

PIXCI-E104X4-4B PIXCI® e104x4-4b PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one to four cameras in Base mode Details... $1755.00

^{Utilizes one Camera Link cable for each Base configuration camera.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-4b default configuration and enable camera specific features.}

PIXCI-E104X4-F2B PIXCI® e104x4-f2b PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one, two, or three cameras in Base mode; or one camera in Medium, Full, or 80-Bit mode along with one or two cameras in Base mode Details... $1755.00

^{Utilizes one Camera Link cable for each Base configuration camera.
Utilizes two Camera Link cables for Medium, Full, or 80-Bit configuration.
For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).
For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).
Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.
Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-f2b default configuration and enable camera specific features.}

^{PIXCI® Cables, Accessories and Options}

CBL-CL-1M Camera Link cable, CL(MDR) connectors, 1 meter Details... $80.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.}

CBL-CL-2M Camera Link cable, CL(MDR) connectors, 2 meter Details... $83.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.}

CBL-CL-3M Camera Link cable, CL(MDR) connectors, 3 meter Details... $88.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-5M, CBL-CL-10M data cable.}

CBL-CL-4.5M Camera Link cable, CL(MDR) connectors, 4.5 meter Details... $Call

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.}

CBL-CL-5M Camera Link cable, CL(MDR) connectors, 5 meter Details... $109.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-10M data cable.}

CBL-CL-7M Camera Link cable, CL(MDR) connectors, 7 meter Details... $Call

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.}

CBL-CL-10M Camera Link cable, CL(MDR) connectors, 10 meter Details... $175.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.
Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M data cable.}

CBL-D9-EXT-6FT DB9 Extension Cable, 6 feet Details... $30.00

^{9 pin D-sub male to 9-pin D-sub female.}

CBL-EC1-TS-1M Trigger In or Strobe Out Cable for EC1, SMB to BNC Plug, 1 meter Details... $53.00

^{Purchase 1 cable for Trigger IN only or Strobe OUT only. Purchase 2 cables for Trigger IN with Strobe OUT.}

CBL-ECB2-TS-1M Trigger In or Strobe Out Cable for ECB2, SMB to BNC Plug, 1 meter Details... $53.00

^{The ECB2 will accept two trigger signals, one for each camera; or allows a single trigger to control capture from both cameras..
Purchase 1 or 2 cable(s) for Trigger IN only or Strobe OUT only. Purchase 2 or 4 cables for Trigger IN with Strobe OUT (pair).}

CBL-ECB134-TS-25CM Trigger/Strobe Cable for ECB1-34, Micro Connector (board) to SMA (user), 25 centimeter Details... $53.00

^{Purchase 1 cable for Trigger IN only or Strobe OUT only. Purchase 2 cables for Trigger IN with Strobe OUT.
Factory installation of cables is recommended.}

CBL-IO-25CM Control cable, 10 Pin Header to DB-9 Pin Male on Full Height Bracket, 25 centimeters $30.00

CBL-IOM-25CM Control cable, Mini 10 Pin Header to DB-9 Pin Male in full height bracket, 25 centimeters $30.00

CBL-MCL-1M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 1 meter Details... $103.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.}

CBL-MCL-2M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 2 meter Details... $109.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-1M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.}

CBL-MCL-3M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 3 meter Details... $122.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.}

CBL-MCL-5M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 5 meter Details... $172.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-6M, CBL-MCL-10Mdata cable.}

CBL-MCL-6M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 6 meter Details... $179.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-10Mdata cable.}

CBL-MCL-10M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 10 meter Details... $199.00

^{CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6Mdata cable.}

LENS-16MM-1.4 TAMRON(R) 23FM16 High Resolution Mono-Focal Machine Vision Lens Details... $192.00

^{2/3" Format, 16 mm, F1.4, Manual Iris, C-Mount.}

OPT-EC-EMI EMI Shielding Option for PIXCI® EC1, ECB1-34, ECB2 Details... $111.00

^{Option for additional EMI shielding for passing FCC and CE emission testing.
Available for: PIXCI-EC1 PIXCI-ECB1-34, and PIXCI-ECB2.
Factory installed option available at time of purchase.
Without additional shielding, ExpressCard frame grabbers are not FCC and CE emission compliant.}

OPT-FHBRKT-CL-2MDR Bracket with 2 Camera Link MDR Connectors and Internal Cables Details... $247.00

^{For use with PIXCI-E4G2 frame grabber.}

OPT-LPBRKT-EB1 Low profile bracket for PIXCI-EB1, PIXCI-EB1P, PIXCI-EB1G2, PIXCI-EB1G2P, for use in low profile computers Details... $5.00

^{No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.}

PRESET-E4 PIXCI® E4 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-E4 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-E4G2 PIXCI® E4G2 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-E4G2 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-E8 PIXCI® E8 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-E8 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-E104X4 PIXCI® E101x4 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-E104X4-2F, PIXCI-E104X4-4B, or PIXCI-E104X4-F2B preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-EB1 PIXCI® EB1 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-EB1 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-EB1MINI PIXCI® EB1mini Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-EB1MINI preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-EB1P PIXCI® EB1P Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-EB1P preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-ECB1-34 PIXCI® ECB1-34 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-ECB1-34 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-ECB2 PIXCI® ECB2 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-ECB2 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PRESET-EL1 PIXCI® EL1 Option: Preset Default {enter camera model} Details... $0.00

^{Option to have PIXCI-EL1 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.
See the PIXCI® Selection Guide for list of eligible cameras.
The preset is easily overridden, or changed, via software.
If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.}

PWR-SV10X-CL Power Supply for SILICON VIDEO® 10M-CL, 10C-CL Cameras Details... $56.00

^{Input: 100-240VAC, 50-60Hz.
Output: 12VDC, 1.15A.
Efficiency Level VI.
Certified: PSE, TUV GS, CE, FCC.
Approvals: UL Listed, RoHS.}

PWR-SV20X-CL Power Supply for SILICON VIDEO® 20C-CL or 20M-CL Camera Details... $165.00

^{Input: 100-240VAC, 50-60Hz, 0.8A.
Output: 12VDC, 2.0A.
Efficiency Level V.
Certified: PSE, TUV GS, CE, FCC.
Approvals: UL Listed, RoHS.}

PWR-SV1514CL Power Supply for SILICON VIDEO® 1514CL Camera Details... $56.00

^{Input: 100-240VAC, 50-60Hz.
Output: 12VDC, 1.15A.
Efficiency Level VI.
Certified: PSE, TUV GS, CE, FCC.
Approvals: UL Listed, RoHS.}

PWR-SV1820CL Power Supply for SILICON VIDEO® 1820CL Camera Details... $56.00

^{Input: 100-240VAC, 50-60Hz.
Output: 12VDC, 1.15A.
Efficiency Level VI.
Certified: PSE, TUV GS, CE, FCC.
Approvals: UL Listed, RoHS.}

SV20-OPT-IRCF Infrared (IR) Cut Filter for SILICON VIDEO® 20C-CL or 20M-CL Cameras Details... $160.00

^{Infrared (IR) cut filter to reduce infrared sensitivity and improve color saturation.
Installs in camera's lens tube; factory installation is recommended.}

SV20-OPT-TM Tripod Mount for SILICON VIDEO® 20C-CL or 20M-CL Cameras Details... $33.00

^{Provides a standard 1/4in.-20 screw mount.}

SV-OPT-MNTIRCF Extra lens mount with infrared (IR) cut filter for SILICON VIDEO® 1C45 and similar cameras infrared sensitivity Details... $56.00

^{Provides infrared (IR) cut filter to reduce infrared sensitivity and improve color saturation.}

SV-OPT-MNTNOF Extra lens mount without infrared (IR) cut filter for SILICON VIDEO® 1C45 and similar cameras Details... $28.00

^{Lacks infrared (IR) cut filter so as to maximize camera's infrared sensitivity.}

TTL-MOD-A-E1-OPT Converter of RS644 differential input and output to TTL input and output Details... $143.00

^{Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.}

TTL-MOD-A-E4-OPT Converter of RS644 differential input and output to TTL input and output Details... $143.00

^{Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.}

TTL-MOD-A-EL1-OPT Converter of RS644 differential input and output to TTL input and output Details... $143.00

^{Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.}

CBL-MCLM-1M Camera Link cable, MiniCL(SDR) connectors, 1 meter Details... $103.00

^{MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.}

CBL-MCLM-2M Camera Link cable, MiniCL(SDR) connectors, 2 meter Details... $109.00

^{MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-3M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.}

CBL-MCLM-3M Camera Link cable, MiniCL(SDR) connectors, 3 meter Details... $122.00

^{MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.}

CBL-MCLM-5M Camera Link cable, MiniCL(SDR) connectors, 5 meter Details... $172.00

^{MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-10Mdata cable.}

CBL-MCLM-10M Camera Link cable, MiniCL(SDR) connectors, 10 meter Details... $199.00

^{MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.
Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5Mdata cable.}

CBL-MINIH2-PWR-6IN miniH2 or miniH2X4F Power Cable Details... $22.00

^{Has mating connector for connection to MINIH2B, MINIH2BL, MINIH2F, MINIH2FL, and MINIH2X4F, with flying leads for connection to external 12VDC.}

PIXCI® Software

ORDER CODE	DESCRIPTION	UNIT PRICE

^{Ready-to-Run Image Processing & Analysis Application Programs (single user license)}

XCAP-LITE XCAP-Lite Imaging Application Program Details... $195.00

^{Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices NITROGEN6 (ARM imx6).
Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).
The XCAP-Lite supports all PIXCI® imaging boards.
Single user license.
The XCAP-Lite is provided free-of-charge with purchase of any PIXCI® imaging board.
Software downloadable; CD available upon request. (Versions for TX1/TX2/A57, TK1/A15, or NITROGEN6/imx6 only downloadable).}

XCAP-LTD XCAP-Ltd Imaging Application Program Details... $695.00

^{Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.
Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).
The XCAP-Ltd supports all PIXCI® imaging boards.
The XCAP-Ltd includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.
Single user license.
Software provided on CD.}

XCAP-STD XCAP-Std Imaging Application Program Details... $1995.00

^{Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.
Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).
The XCAP-Std supports all PIXCI® imaging boards.
The XCAP-Std includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.
Single user license.
Software provided on CD.}

^{Programming Libraries (single developer license)}

XCLIB XCLIB Software Development Kit (SDK) Details... $695.00

^{For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under 64 bit Windows (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.
Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.}

XCLIBLITE XCLIB-Lite Software Development Kit (SDK) Details... $225.00

^{XCLIB-Lite is limited to using no more than 64 MB of memory for video frame buffers, and is limited to operating only one PIXCI® imaging board and one camera.
For all supported platforms and operating systems; for all PIXCI® imaging boards.
Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.
Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express and ExpressCard PIXCI® imaging boards.
Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express and ExpressCard PIXCI® imaging boards.
Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).
Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Single Developer, Royalty-Free License. Includes HTML manual.
Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.}

^{Programming Libraries w. Image Processing & Measurements (single developer license)}

XCLIBIPL XCLIB w. PXIPL Software Development Kit (SDK) Details... $1095.00

^{For all supported platforms and operating systems; for all PIXCI® imaging boards.
Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.
Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.
Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.
Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).
Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.
Single Developer, Royalty-Free License. Includes HTML manual.
Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.}

All prices EXW Buffalo Grove, Illinois. USA Terms: Net 30 Days, subject to credit acceptance. EPIX, Inc. products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of EPIX, Inc.

See complete Terms of Sale

EPIX, SILICON VIDEO, and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCLIB, and PXIPL are trademarks of EPIX, Inc. Other brand, product, and company names are trademarks or registered trademarks of their respective owners. Prices, terms, and specifications subject to change without notice.

Software price protection: Within 90 days of original shipment, a discount equal to the original purchase price of XCAP, XCLIB, or XCLIB+PXIPL may be applied to a new version of the same software.

Programming libraries license a single program developer; the developed program may be reproduced without payment of royalties, as detailed in the Software License Agreement.

Contact EPIX Inc., or your distributor of EPIX® imaging products, for volume discounts and OEM pricing.

EPIX, Inc.
381 Lexington Drive
Buffalo Grove IL 60089
847.465.1818
847.465.1919 (fax)
epix@epixinc.com
www.epixinc.com