For use in a notebook/laptop computer with an ExpressCard/34 or ExpressCard/54 slot.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable.

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable.

Optionally order CBL-ECB134-TS-25CM cable for TTL Trigger Input and TTL Strobe Output. (Factory installed option available at time of purchase.).

Optionally order OPT-EC-EMI for additional EMI shielding. (Factory installed option available at time of purchase.).

Optionally add PRESET-ECB1-34 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® ECB1-34 default configuration and enable camera specific features.

For use in a notebook/laptop computer with an ExpressCard/54 slot.

Utilizes one Camera Link cable for each Base configuration camera.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Optionally order up to four CBL-ECB2-TS-1M cables for TTL Trigger Input(s) or TTL Strobe Output(s).

Optionally order OPT-EC-EMI for additional EMI shielding. (Factory installed option available at time of purchase.).

Optionally add PRESET-ECB2 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® ECB2 default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes High Profile bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Alternately, order PIXCI-EB1-LP for same card w. Low Profile Bracket w/out DB-9 connector.

Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket w/out DB-9 connector.

Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes Low Profile Bracket w/out DB-9 connector. Order PIXCI-EB1 for version with Full Height Bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.

Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket (replacement done at factory if ordered with PIXCI-EB1-NDB9).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.

Optionally add PRESET-EB1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1 default configuration and enable camera specific features.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes Full Height Bracket. Optionally order OPT-LPBRKT-EB1 to substitute Low Profile Bracket.

Optionally add PRESET-EB1P order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1P default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes High Profile bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Alternately, order PIXCI-EB1G2-LP for same card w. Low Profile Bracket w/out DB-9 connector.

Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket w/out DB-9 connector.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes Low Profile Bracket w/out DB-9 connector. Order PIXCI-EB1G2 for version with Full Height Bracket with DB-9 connector for access to Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Order OPT-LPBRKT-EB1 for field replaceable Low Profile Bracket (replacement done at factory if ordered with PIXCI-EB1G2-NDB9).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs w. DB-9 connector on separate bracket.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Includes Full Height Bracket. Optionally order OPT-LPBRKT-EB1 to substitute Low Profile Bracket.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.

Switchable to support either one Base, Medium or Full Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types).

In dual Base mode software identifies as PIXCI® EL1DB; replaces previous PIXCI® EL1DB product.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for Medium, Full, or 80 Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add PRESET-EL1 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EL1 default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Available without SDR connector for custom cable attachment.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Extended temperature range of -40c to +80c for industrial use.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Extended temperature range of -40c to +80c for industrial use.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Base camera link frame grabber plugs into a mini PCI express card slot and uses a very flexible Samtec cable to connect to the MDR connector PCB.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Base camera link frame grabber plugs into a mini PCI express card slot and uses a very flexible Samtec cable to connect to the SDR connector PCB.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Base camera link frame grabber plugs into a mini PCI express card slot and uses a low profile Molex flat cable for height constrained systems. MDR connector.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Base camera link frame grabber plugs into a mini PCI express card slot and uses a low profile Molex flat cable for height constrained systems. SDR connector.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Extended temperature range of -40c to +80c for industrial use.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Extended temperature range of -40c to +80c for industrial use.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Contact EPIX, Inc. for other connection and cabling options.

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-EB1MINI order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® EB1mini default configuration and enable camera specific features.

Dual Base Camera Link frame grabber uses a half mini PCI express, an M.2 Key E or M.2 Key M slot.

Logic card has two Camera Link® MDR or SDR connectors; a flat cable connects to half size mPCIe or M.2 Bus Card.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.

Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.

Utilizes one Camera Link Connector Card each Base configuration camera. Must select one Camera Link Connector 0:
MH2-CLC0-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-SDR selects SDR for Camera Link connector 0.

May also select one Camera Link Connector 1:
MH2-CLC1-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-SDR selects SDR for Camera Link connector 1.

Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.

See MH2-CLC0-MDR, MH2-CLC0-SDR, MH2-CLC1-MDR, or MH2-CLC1-SDR for suggested Camera Link cables.

Dual Base Camera Link frame grabber uses a half mini PCI express, an M.2 Key E or M.2 Key M slot.

Logic card utilizes two flexible cables connect to Camera Link® MDR or SDR Connector Cards; a flat cable connects to half size mPCIe or M.2 Bus Card.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.

Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.

Utilizes one Camera Link Connector Card each Base configuration camera. Must select one Camera Link Connector 0 Card:
MH2-CLC0-06.00-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-06.00-SDR selects SDR for Camera Link connector 0.
MH2-CLC0-06.00-SDRP selects cable with SDR Plug for Camera Link connector 0.

May also select one Camera Link Connector 1 Card:
MH2-CLC1-06.00-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-06.00-SDR selects SDR for Camera Link connector 1.
MH2-CLC1-06.00-SDRP selects cable with SDR Plug for Camera Link connector 1.

Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.

See MH2-CLC0-06.00-MDR, MH2-CLC0-06.00-SDR, MH2-CLC1-06.00-MDR, or MH2-CLC1-06.00-SDR for suggested Camera Link cables.

Base/Medium/Full/80-Bit mode camera link frame grabber uses a half mini PCI express, an M.2 Key E, or M.2 Key M slot.

Logic card has two Camera Link® MDR or SDR connectors; utilizes a flat cable connects to half size mPCIe or M.2 Bus Card.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.

Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.

Utilizes one or two Camera Link cables for the camera. Must select one Camera Link Connector 0:
MH2-CLC0-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-SDR selects SDR for Camera Link connector 0.

May also select one Camera Link Connector 1:
MH2-CLC1-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-SDR selects SDR for Camera Link connector 1.

Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.

See MH2-CLC0-MDR, MH2-CLC0-SDR, MH2-CLC1-MDR, or MH2-CLC1-SDR for suggested Camera Link cables.

Base/Medium/Full/80-Bit mode Camera Link frame grabber uses a half mini PCI express, an M.2 Key E, or M.2 Key M slot.

Logic card has two flexible cables to connect to Camera Link® MDR or SDR Connector Cards; utilizes a flat cable connects to half size mPCIe or M.2 Bus Card.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.

Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.

Utilizes one or two Camera Link cables for the camera. Must select one Camera Link Connector 0 Card:
MH2-CLC0-06.00-MDR selects MDR for Camera Link connector 0.
MH2-CLC0-06.00-SDR selects SDR for Camera Link connector 0.
MH2-CLC0-06.00-SDRP selects cable with SDR Plug for Camera Link connector 0.

May also select one Camera Link Connector 1 Card:
MH2-CLC1-06.00-MDR selects MDR for Camera Link connector 1.
MH2-CLC1-06.00-SDR selects SDR for Camera Link connector 1.
MH2-CLC1-06.00-SDRP selects cable with SDR Plug for Camera Link connector 1.

Must select one Bus Card:
MH2-BUS-06.00-MPCIE selects a half mini PCIe Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2E selects an M.2 Key E Bus Card, attached with 6 inch cable.
MH2-BUS-06.00-M2M selects an M.2 Key M Bus Card, attached with 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2-GRADE-A for automotive temperature grade, -40 to +105C.
MH2-GRADE-I for industrial temperature grade, -40 to +80C.

See MH2-CLC0-06.00-MDR, MH2-CLC0-06.00-SDR, MH2-CLC1-06.00-MDR, or MH2-CLC1-06.00-SDR for suggested Camera Link cables.

Not for use with MINIH2X4F .

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Connects directly on cameras with MiniCL(SDR) connectors.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Connects directly on cameras with MiniCL(SDR) connectors.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

Base/Medium/Full/80-Bit mode camera link frame grabber uses an M.2 Key M slot.

Logic card has two Camera Link® MDR or SDR connectors; a flat cable connects to M.2 Bus Card.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras; PoCL selected via jumper.

Requires external 12V DC power (regardless of use of PoCL), see CBL-MINIH2-PWR-6IN for optional power cable.

Utilizes one or two Camera Link cables for the camera. Must select Camera Link Connectors:
miniH2x4F-M selects MDR for Camera Link connectors.
miniH2x4F-S selects SDR for Camera Link connectors.

Must select one Bus Card and cable:
MH2X4-BUS-M2M selects an M.2 Key M Bus Card;
CBL-ECUE-20CM selects a 20 cm cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MH2X4F-GRADE-A for automotive temperature grade, -40 to +105C.
MH2X4F-GRADE-I for industrial temperature grade, -40 to +80C.

See MINIH2X4F-M, or MINIH2X4F-S for suggested Camera Link cables.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

For use with miniH2x4F.

Includes 20 inch Thunderbolt cable.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Base/Medium/Full/80-Bit mode camera link frame grabber uses an M.2 Key M slot.

Logic card has one flexible cable to connect to Camera Link® MDR or SDR Connector Card.

Utilizes one or two Camera Link cables for the camera. Must select Camera Link Connectors:
MFMS-M selects MDR for Camera Link connectors.
MFMS-S selects SDR for Camera Link connectors.

Must select cable connecting the Logic Card to the Connector Card:
CBL-HLCD2006TR-6 selects a 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MF2280-GRADE-A for automotive temperature grade, -40 to +105C.
MF2280-GRADE-I for industrial temperature grade, -40 to +80C.

See MFMS-M, or MFMS-S for suggested Camera Link cables.

See CBL-MFMS-POCL-6 to insert external 12V DC as camera power (PoCL).

Base/Medium/Full/80-Bit mode camera link frame grabber uses an M.2 Key M slot.

Logic card has one flexible cable to connect to Camera Link® MDR or SDR Connector Card.

Utilizes one or two Camera Link cables for the camera. Must select Camera Link Connectors:
MFMS-M selects MDR for Camera Link connectors.
MFMS-S selects SDR for Camera Link connectors.

Must select cable connecting the Logic Card to the Connector Card:
CBL-HLCD2006TR-6 selects a 6 inch cable.

Commercial temperature grade, 0 to +70C, default. Optionally specify Temperature Grade:
MF2280-GRADE-A for automotive temperature grade, -40 to +105C.
MF2280-GRADE-I for industrial temperature grade, -40 to +80C.

See MFMS-M, or MFMS-S for suggested Camera Link cables.

See CBL-MFMS-POCL-6 to insert external 12V DC as camera power (PoCL).

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s).

For use with MF2280.

For use with MFMS-M or MFMS-S.

Requires external 12V DC supply for PoCL power.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.

Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types).

In dual Base mode software identifies as PIXCI® E4DB; replaces previous PIXCI® E4DB product.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for Medium, Full, or 80 Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E4 default configuration and enable camera specific features.

Switchable to support either two Base, Medium, Full or 80-Bit Camera Link mode cameras; or to support up to four Base Camera Link mode cameras (of same or different types).

Provides first and second Camera Link MDR Connectors on bracket - for two Base mode cameras or one Medium, Full, 80-Bit mode camera; provides third and fourth Camera Link MDR Connectors on PCB - for two Base mode cameras or one Medium, Full, 80-Bit mode camera. Use of extension cables to access third and fourth Camera Link MDR Connectors is recommended, especially with smaller PC motherboards; optionally order OPT-FHBRKT-CL-2MDR for an additional bracket with third and fourth Camera Link MDR Connectors with extension cables from the PCB mounted Camera Link MDR Connectors.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for each Medium, Full, or 80 Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E4G2 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E4G2 default configuration and enable camera specific features.

Can be used with PoCL (Power over Camera Link®) cameras or with non-PoCL cameras.

Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support up to two Base Camera Link mode cameras (of same or different types).

In dual Base mode software identifies as PIXCI® E8DB.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for each Medium, Full, or 80 Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E8 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® E8 default configuration and enable camera specific features.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for Medium, Full, or 80-Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-2f default configuration and enable camera specific features.

Utilizes one Camera Link cable for each Base configuration camera.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-4b default configuration and enable camera specific features.

Utilizes one Camera Link cable for each Base configuration camera.

Utilizes two Camera Link cables for Medium, Full, or 80-Bit configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs.

Optionally add PRESET-E104X4 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® e104x4-f2b default configuration and enable camera specific features.

Must use camera specific order code "CL1-*****" to order a PIXCI CL1.The PIXCI® CL1 is a family of frame grabbers, each customized for use with a subset of cameras.

Utilizes one Camera Link cable for Base configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT or TTL-MOD-B-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

Call for assistance selecting specific order code and appropriate TTL module.

Utilizes one Camera Link cable for Base configuration.

Utilizes two Camera Link cables for Medium or Full configuration.

For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s).

For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Optionally order CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally order TTL-MOD-A-CL2-OPT for TTL Trigger Input, TTL Strobe Output option.

Optionally add PRESET-CL2 order code and specify the desired camera model, as per the PIXCI® Selection Guide, to preset the PIXCI® CL2 default configuration and enable camera specific features.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-5M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M data cable.

Internal Camera Link cable, Male Right-Angle Exit-Up (MDR) to Female Exit-Straight (MDR), 30 centimeters.

For use with PIXCI-E4G2.

9 pin D-sub male to 9-pin D-sub female.

9 pin D-sub male to 9-pin D-sub male.

Purchase 1 cable for Trigger IN only or Strobe OUT only. Purchase 2 cables for Trigger IN with Strobe OUT.

The ECB2 will accept two trigger signals, one for each camera; or allows a single trigger to control capture from both cameras..

Purchase 1 or 2 cable(s) for Trigger IN only or Strobe OUT only. Purchase 2 or 4 cables for Trigger IN with Strobe OUT (pair).

Purchase 1 cable for Trigger IN only or Strobe OUT only. Purchase 2 cables for Trigger IN with Strobe OUT.

Factory installation of cables is recommended.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-10Mdata cable.

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6Mdata cable.

MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.

MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-3M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.

MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-5M, CBL-MCLM-10Mdata cable.

MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-10Mdata cable.

MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5Mdata cable.

Has mating connector for connection to MINIH2B, MINIH2BL, MINIH2F, MINIH2FL, and MINIH2X4F, with flying leads for connection to external 12VDC.

Option for additional EMI shielding for passing FCC and CE emission testing.

Available for: PIXCI-EC1 PIXCI-ECB1-34, and PIXCI-ECB2.

Factory installed option available at time of purchase.

Without additional shielding, ExpressCard frame grabbers are not FCC and CE emission compliant.

For use with PIXCI-E4G2 frame grabber.

Same as the default bracket provided with PIXCI-EB1, PIXCI-EB1P, PIXCI-EB1G2, and PIXCI-EB1G2P.

No charge if board is purchased with low profile bracket installed. Charge applies if bracket is purchased separately or in addition to the standard height bracket.

Option to have PIXCI-CL2 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-E4 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-E4G2 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-E8 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-E104X4-2F, PIXCI-E104X4-4B, or PIXCI-E104X4-F2B preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-EB1 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-EB1MINI preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-EB1P preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-ECB1-34 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-ECB2 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Option to have PIXCI-EL1 preset to the specified camera, so that software automatically configures for the specified camera and/or provides camera-specific controls.

See the PIXCI® Selection Guide for list of eligible cameras.

The preset is easily overridden, or changed, via software.

If preset is not specified, or the desired camera is not on the list, a simple XCAP dialog will allow entry of the camera's resolution, bit depth, and other necessary characteristics.

Includes TTL to Differential converter, and CBL-D9-EXTMM-6FT six ft. extension cable.

Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.

Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.

Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.

Includes CBL-IO-25CM control cable, TTL to Differential converter, and CBL-D9-EXT-6FT six ft. extension cable.

Includes TTL to Differential converter, and CBL-D9-EXTMM-6FT six ft. extension cable.

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices NITROGEN6 (ARM imx6).

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Lite supports all PIXCI® imaging boards.

Single user license.

The XCAP-Lite is provided free-of-charge with purchase of any PIXCI® imaging board.

Software downloadable; CD available upon request. (Versions for TX1/TX2/A57, TK1/A15, or NITROGEN6/imx6 only downloadable).

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Ltd supports all PIXCI® imaging boards.

The XCAP-Ltd includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Std supports all PIXCI® imaging boards.

The XCAP-Std includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under 64 bit Windows (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

XCLIB-Lite is limited to using no more than 64 MB of memory for video frame buffers, and is limited to operating only one PIXCI® imaging board and one camera.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.