EPIX® Price List - Effective Date: 31 Jan 2024
PIXCI® Hardware for Imperx Cameras
ORDER CODE DESCRIPTION UNIT PRICE

PIXCI® Hardware for Imperx Camera Link Cameras
PIXCI-CL2 PIXCI® CL2 PCI 64-Bit Frame Grabber for Camera Link® camera in Base, Medium, Full modes
 $985.00
PIXCI-EB1 PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode
 $425.00
PIXCI-EB1-LP PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode, with Low Profile Bracket
 $395.00
PIXCI-EB1-NDB9 PIXCI® EB1 PCI Express x1 Frame Grabber for Camera Link® camera in Base mode, w/out DB-9 Connector
 $395.00
PIXCI-EB1P PIXCI® EB1-PoCL PCI Express x1 Frame Grabber for Camera Link® PoCL or non-PoCL camera in Base mode
 $450.00
PIXCI-EB1G2 PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode
 $595.00
PIXCI-EB1G2-LP PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode, with Low Profile Bracket
 $550.00
PIXCI-EB1G2-NDB9 PIXCI® EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link® camera in Base mode, w/out DB-9 Connector
 $550.00
PIXCI-EB1G2P PIXCI® EB1-PoCL PCI Express x1 gen 2 Frame Grabber for Camera Link® PoCL or non-PoCL camera in Base mode
 $600.00
PIXCI-EB1MINI PIXCI® EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link®
 $395.00
PIXCI-EB1MINI-H PIXCI® EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 cm long cable
 $480.00
PIXCI-EB1MINI-G-M PIXCI® EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 30 cm long cable
 $420.00
PIXCI-EB1MINI-F-S PIXCI® EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $575.00
PIXCI-EB1MINI-F-M PIXCI® EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $575.00
PIXCI-EB1MINI-I PIXCI® EB1mini Industrial PCI Express Mini Card Frame Grabber for Base Camera Link®
 $495.00
PIXCI-EB1MINI-H-I PIXCI® EB1miniH Industrial PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 30 cm long cable
 $517.00
PIXCI-EB1MINI-F-S-I PIXCI® EB1miniF-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $645.00
PIXCI-EB1MINI-F-M-I PIXCI® EB1miniF-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $645.00
PIXCI-EB1MINI-GC-S PIXCI® EB1miniGC-S PCI Express Mini Card two board Frame Grabber with CL(SDR) connector for Base Camera Link®, attached with 15.24 cm long cable
 $475.00
PIXCI-EB1MINI-GC-M PIXCI® EB1miniGC-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 15.24 cm long cable
 $450.00
PIXCI-EB1MINI-GM-S PIXCI® EB1miniGM-S PCI Express Mini Card two board Frame Grabber with CL(SDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $420.00
PIXCI-EB1MINI-GM-M PIXCI® EB1miniGM-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link®, attached with 20.32 cm long cable
 $420.00
MF2280 PIXCI® mf2280 w/PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $695.00
MF2280+ PIXCI® mf2280+ w/PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $865.00
MF2280-C PIXCI® mf2280 Thunderbolt 3 Frame Grabber with enclosure for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $1315.00
MINIH2B PIXCI® miniH2B PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® cameras, Dual Base
 $755.00
MINIH2BL PIXCI® miniH2BL PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® cameras, Dual Base
 $775.00
MINIH2F PIXCI® miniH2F PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $755.00
MINIH2FL PIXCI® miniH2FL PCI Express x1 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $775.00
MINIH2X4F PIXCI® miniH2x4F PCI Express x4 Gen 2 Frame Grabber Logic Card for Camera Link® camera in Base/Medium/Full/80-Bit mode
 $655.00
PIXCI-ECB1-34 PIXCI® ECB1-34 ExpressCard/34 Frame Grabber for Camera Link® camera in Base mode
 $655.00
PIXCI-ECB2 PIXCI® ECB2 ExpressCard/54 Frame Grabber for Camera Link® camera(s) in Base mode (dual)
 $710.00
PIXCI-EL1 PIXCI® EL1 PCI Express x1 Frame Grabber for Camera Link® camera in Base, Medium, Full modes and in Base mode (single or dual camera)
 $959.00
PIXCI-E4 PIXCI® E4 PCI Express x4 Frame Grabber for Camera Link® PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)
 $979.00
PIXCI-E4G2 PIXCI® E4G2 PCI Express x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode, or one to four cameras in Base mode
 $1275.00
PIXCI-E8 PIXCI® E8 PCI Express x8 Frame Grabber for Camera Link® PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)
 $1275.00
PIXCI-E104X4-2F PIXCI® e104x4-2f PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode
 $1755.00
PIXCI-E104X4-4B PIXCI® e104x4-4b PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one to four cameras in Base mode
 $1755.00
PIXCI-E104X4-F2B PIXCI® e104x4-f2b PCIe/104 x4 Gen 2.0 Frame Grabber for Camera Link® camera(s); one, two, or three cameras in Base mode; or one camera in Medium, Full, or 80-Bit mode along with one or two cameras in Base mode
 $1755.00

PIXCI® CL1 Hardware for Imperx Camera Link Cameras
CL1-IPX-1M48 PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-1M48 Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-1M48C PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-1M48C Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-1M48-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-1M48-L Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-1M48-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-1M48-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-2M30-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-2M30-L Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-2M30-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-2M30-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-11M5-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-11M5-L Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-11M5-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-11M5-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-16M3-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-16M3-L Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-16M3-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-16M3-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA120-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA120-L Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA120-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA120-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA210 PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA210 Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA210C PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA210C Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA210-L PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA210-L camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-IPX-VGA210-LC PIXCI® Camera Link PCI Frame Grabber for IMPERX IPX-VGA210-LC Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-MDC-C1CL01 PIXCI® Camera Link PCI Frame Grabber for IMPERX MDC-1004C (MDC-C1CL01) Color Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 
CL1-MDC-M1CL01 PIXCI® Camera Link PCI Frame Grabber for IMPERX MDC-1004 (MDC-M1CL01) Monochrome Camera Details... $795.00
 

Requires CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-4.5M, CBL-CL-5M, CBL-CL-7M, or CBL-CL-10M data cable.

Optionally add CBL-IO-25CM Control cable for differential Trigger and Frame Enable Inputs, differential Strobe Output.

Optionally add TTL-MOD-A-CL1-OPT for TTL Trigger Input, TTL Strobe Output option.

 

PIXCI® Cables, Accessories and Options
CBL-CL-1M Camera Link cable, CL(MDR) connectors, 1 meter Details... $80.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

 
CBL-CL-2M Camera Link cable, CL(MDR) connectors, 2 meter Details... $83.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

 
CBL-CL-3M Camera Link cable, CL(MDR) connectors, 3 meter Details... $88.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-5M, CBL-CL-10M data cable.

 
CBL-CL-4.5M Camera Link cable, CL(MDR) connectors, 4.5 meter Details... $Call
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

 
CBL-CL-5M Camera Link cable, CL(MDR) connectors, 5 meter Details... $109.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-10M data cable.

 
CBL-CL-7M Camera Link cable, CL(MDR) connectors, 7 meter Details... $Call
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, CBL-CL-10M data cable.

 
CBL-CL-10M Camera Link cable, CL(MDR) connectors, 10 meter Details... $175.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center.

Also available in other lengths: CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M data cable.

 
CBL-D9-EXT-6FT DB9 Extension Cable, 6 feet Details... $30.00
 

9 pin D-sub male to 9-pin D-sub female.

 
CBL-D9-EXTMM-6FT DB9 Extension Cable, 6 feet Details... $30.00
 

9 pin D-sub male to 9-pin D-sub male.

 
CBL-IO-25CM Control cable, 10 Pin Header to DB-9 Pin Male on Full Height Bracket, 25 centimeters $30.00
CBL-MCL-1M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 1 meter Details... $103.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

 
CBL-MCL-2M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 2 meter Details... $109.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

 
CBL-MCL-3M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 3 meter Details... $122.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-5M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

 
CBL-MCL-5M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 5 meter Details... $172.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-6M, CBL-MCL-10Mdata cable.

 
CBL-MCL-6M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 6 meter Details... $179.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-10Mdata cable.

 
CBL-MCL-10M Camera Link cable, MiniCL(SDR) & CL(MDR) connectors, 10 meter Details... $199.00
 

CL(MDR) connectors: Locking screws are 31.2 mm center-to-center. MiniCL(SDR) connectors: Locking screws are 19.2 mm center-to-center.

Also available in other lengths: CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, CBL-MCL-6Mdata cable.

 
TTL-MOD-A-CL1-OPT Converter of RS644 differential input and output to TTL input and output Details... $143.00
 

Includes TTL to Differential converter, and CBL-D9-EXTMM-6FT six ft. extension cable.

 


PIXCI® Software
ORDER CODE DESCRIPTION UNIT PRICE

Ready-to-Run Image Processing & Analysis Application Programs (single user license)
XCAP-LITE XCAP-Lite Imaging Application Program Details... $195.00
 

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices NITROGEN6 (ARM imx6).

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Lite supports all PIXCI® imaging boards.

Single user license.

The XCAP-Lite is provided free-of-charge with purchase of any PIXCI® imaging board.

Software downloadable; CD available upon request. (Versions for TX1/TX2/A57, TK1/A15, or NITROGEN6/imx6 only downloadable).

 
XCAP-LTD XCAP-Ltd Imaging Application Program Details... $695.00
 

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Ltd supports all PIXCI® imaging boards.

The XCAP-Ltd includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

 
XCAP-STD XCAP-Std Imaging Application Program Details... $1995.00
 

Compatible with: Windows 11 (64 bit); Windows 10, 8, 7, Vista, XP (32 and 64 bit); Windows 2000, NT, ME, 98, 95 (32 bit); Linux on Intel i386; Linux on Intel x86-64; Linux on nVidia TX1/TX2/Xavier/Nano (ARM A57); Linux on nVidia TK1 (ARM A15); Linux on Boundary Devices/ARM NITROGEN6/imx6.

Includes: system (Windows) and kernel (Linux) device drivers for PIXCI® frame grabbers; serial Camera Link API and COM port drivers (Windows), TTY port driver (Linux); Video for Linux (V4L2) driver (Linux); Media Foundation Frame Server ('Camera' and DirectShow) driver (Windows); TWAIN and ImagePro drivers (Windows).

The XCAP-Std supports all PIXCI® imaging boards.

The XCAP-Std includes a USB authorization key. Optionally order XCAP-OPT-PAR for alternate parallel (printer) port authorization key.

Single user license.

Software provided on CD.

 

Programming Libraries (single developer license)
XCLIB XCLIB Software Development Kit (SDK) Details... $695.00
 

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6): Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under 64 bit Windows (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

 
XCLIBLITE XCLIB-Lite Software Development Kit (SDK) Details... $225.00
 

XCLIB-Lite is limited to using no more than 64 MB of memory for video frame buffers, and is limited to operating only one PIXCI® imaging board and one camera.

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express and ExpressCard PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express and ExpressCard PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

 

Programming Libraries w. Image Processing & Measurements (single developer license)
XCLIBIPL XCLIB w. PXIPL Software Development Kit (SDK) Details... $1095.00
 

For all supported platforms and operating systems; for all PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI® imaging boards.

Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 64 bit library for 64 bit applications under Linux 64 bit and nVidia TX1/TX2/Xavier/Nano (ARM A57); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 32 bit library for 32 bit applications under Linux 32 bit and nVidia TK1 (ARM A15) or Boundary Devices NITROGEN6 (ARM imx6); Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards.

Includes 64 bit DLL for 64 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PCI Express, ExpressCard, and M.2 PIXCI® imaging boards; also supports PCI and 64-Bit PCI PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Includes 32 bit DLL for 32 bit applications under Windows 32 bit (10, 8, 7, Vista, XP, 2000, NT) and Intel i386: Supports all PIXCI® imaging boards, except only PCI and 64-Bit PCI PIXCI® imaging boards are supported under Windows NT (Windows NT does not support PCI Express or ExpressCard).

Includes 32 bit DLL for 32 bit applications under Windows 64 bit (11, 10, 8, 7, Vista, XP) and Intel x86-64: Supports all PIXCI® imaging boards (except for PIXCI® SV2 & SV3) but less than 4GB of memory can be used for video frame buffers.

Single Developer, Royalty-Free License. Includes HTML manual.

Versions for Intel i386 and x86-64 provided on CD, all versions can be downloaded from web site; requires activation code.

 

All prices EXW Buffalo Grove, Illinois. USA Terms: Net 30 Days, subject to credit acceptance. EPIX, Inc. products are not authorized for use as critical components in life support devices or systems without the express written approval of the president of EPIX, Inc.

 See complete Terms of Sale

EPIX, SILICON VIDEO, and PIXCI are registered trademarks of EPIX, Inc. XCAP, XCLIB, and PXIPL are trademarks of EPIX, Inc. Other brand, product, and company names are trademarks or registered trademarks of their respective owners. Prices, terms, and specifications subject to change without notice.

Software price protection: Within 90 days of original shipment, a discount equal to the original purchase price of XCAP, XCLIB, or XCLIB+PXIPL may be applied to a new version of the same software.

Programming libraries license a single program developer; the developed program may be reproduced without payment of royalties, as detailed in the Software License Agreement.

Contact EPIX Inc., or your distributor of EPIX® imaging products, for volume discounts and OEM pricing.
EPIX, Inc.
381 Lexington Drive
Buffalo Grove IL 60089
847.465.1818
847.465.1919 (fax)
epix@epixinc.com
www.epixinc.com