XCAP Control Panel for the PhotonFocus MV1-D1312-240-CL-8 with the PIXCI® mf2280
XCAP software software provides easy to use controls for the PhotonFocus MV1-D1312-240-CL-8 camera as supported by the PIXCI® mf2280 frame grabber using the M.2 x4 Gen 2 bus/interface. After following the camera manufacturer's directions to configure the camera, these controls allow easy configuration of the frame grabber to match!
Try these controls: Download,
install, and run XCAP.
Click PIXCI®, PIXCI® Camera Info.
Click under 'Adjust Dialog' to launch interactive controls for this or any other