PIXCI® EB1G2
PCI Express 2.0 x1 Base Camera Link Frame Grabber
Features
- PCIe x1 Gen 2 low-profile desktop frame grabber
- Operates in any PCI Express slot
- 5 gigabit per second burst transfer rate
- 409 megabytes per second sustained transfer rate
- One 26-pin MDR Camera Link connector
- Image data DMA transferred to motherboard memory
- 64-bit memory addressing
Capture
- From a Base Camera Link camera
- From line scan or area scan cameras
- From monochrome or color cameras
- Individual lines or frames
- Continuous video
- Triggered image sequences
Trigger and I/O
- Camera exposure and asynchronous reset control
- Trigger and frame enable inputs
- Strobe output
- General purpose inputs and outputs
Options
- Standard or low-profile bracket available
- Optional standard height bracket with Dsub for trigger,etc.
Specifications
- 12 V @ 190 mA, 3.3 V @ 130 mA
- Average power consumption: 2.709 Watts
- 8.38 cm long, 6.88 cm high, 3.30” long by 2.71” high
- 48 grams, 1.7 ounces
- 0 to 70 degrees Celsius operation
- CE, FCC, & ROHS Compliant
- Accepts camera pixel clocks from 20 to 85 MHz
Software
- XCAP-Lite image capture, display, and save program included with frame grabber purchase
- XCAP-LTD captures video to computer memory and more..
- XCAP-STD streams video to disk and performs image processing and more..
- PIXCI Selection Guide lists cameras supported with dedicated Capture & Adjust dialogs
- XCAP supports all camera link cameras connected to PIXCI® frame grabbers
- XCLIB programmer libraries for frame grabber and camera control
- PXIPL image processing, measurement, and analysis libraries
- Windows & Linux, 32 & 64-bit
- TWAIN compatible
- 3rd Party software solutions also available.
SPECIFICATIONS
- SIGNAL INPUT & OUTPUT:
- EIA RS-644 (LVDS) Drivers & Receivers
support pixel clock frequencies up to 85 MHz.
- PERFORMANCE:
Supports the camera's maximum: - Horizontal Resolution
- Vertical Resolution
- Frame Rate
- Bit Depth
- CONNECTIONS:
- One 26-pin 3M MDR Camera Link connector for Base.
- 9-pin connector for Trigger, Frame Enable, Strobe, and General Purpose I/O.
- Camera Link cables available.
- DATA TRANSFERS:
- Supports cameras with data output rates up to 409 MBytes/second.
- (Performance may vary depending on computer system capabilities.)
- 64-bit memory addressing
- BUS REQUIREMENTS:
- PCI Express x1 Gen 2 or better slot.
- Operates in PCI Express x16, x8, x4, or x1 slot.
- DIMENSIONS:
- 8.38 cm long by 6.88 cm high
(3.30" long x 2.71" high)
- CERTIFICATIONS:
- CE Compliant
- ROHS Compliant
- EPIX SOFTWARE Support:
Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL.
Compatible with 32-bit & 64-bit Windows 11, 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Windows Media Foundation (DirectShow) and Video for Linux (V4L2) drivers are included with all versions of XCAP. TWAIN drivers available.