PIXCI® series imaging boards interface to over 1000 different camera models made by over 70 camera manufacturers. Use this guide to check XCAP software's support for your camera; click on the Camera Controls link to view the custom, camera specific, control panels. Or, use the guide to help select a new camera with the characteristics you need! (Last Updated: 18 May 2023)

EPIX, Inc. is continually engineering new products and expanding its support for cameras used in research, industry, and other demanding applications. Please contact us if your camera isn't listed.

Camera/Format	Resolution	Format (at dflt. res.)	Pixels	Supported By	Notes	Custom Controls	Order Code	Software
Andor Zyla 5.5 16 bit	2560x2160	75.00 fps, Progressive	Monochrome, 16 bits, square	PIXCI® E4TX2-2F, PCI Express x4 Gen 2	Note 1	See Controls!	PIXCI-E4TX2	XCAP XCLIB
				PIXCI® E4G2-2F, PCI Express x4 Gen 2	Note 2	See Controls!	PIXCI-E4G2	XCAP XCLIB
				PIXCI® e104x4-2f, PCIe/104 x4 Gen 2	Note 3	See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
				PIXCI® mf2280, M.2 x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2x4F, M.2 x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2F, PCI Express Mini x1 Gen 2 / M.2	Note 4	See Controls!	MINIH2F	XCAP XCLIB
				PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
				PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® E4, PCI Express x4	Note 5	See Controls!	PIXCI-E4	XCAP XCLIB

Note 1. The PIXCI® E4TX2-2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® E4TX2-2F Frame Grabber. (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 2. The PIXCI® E4G2-2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® E4G2-2F Frame Grabber. (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 3. The PIXCI® e104x4-2f Frame Grabber's capture bandwidth is limited by the computer's PCIe/104 x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® e104x4-2f Frame Grabber. (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 4. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 / M.2 bus/interface. The capture resolution (AOI) must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 / M.2 bus/interface. (The PCI Express mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.)

Note 5. The PIXCI® E4 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 bus/interface. The capture resolution (AOI) must be reduced to allow operation within the limits of the PCI Express x4 bus/interface. (The PCI Express x4 interface has, on most computers, an effective maximum bandwidth of approximately 777 MByte/sec.) Consider a PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative.