PIXCI® miniH2F
Embedded Full, Medium, or Base Camera Link Frame Grabber
PIXCI miniH2F captures digital video from any full, medium, or base camera link camera and burst transfers images to the mini PCIe bus at 500 megabytes per second with sustained rates of 409 megabytes per second. Includes software to capture, view, and store images.
Features
- Plugs into any mini PCIe slot
- 5 gigabit per second burst transfer rate
- 409 megabytes per second sustained transfer rate
- Two 26 pin MDR or SDR camera link connectors
- Image data DMA transferred to host memory
- 64 bit memory addressing
Capture
- From a full, medium, or base camera link camera
- From line scan or area scan cameras
- From monochrome or color cameras
- Individual lines or frames
- Continuous video
- Triggered image sequences
Trigger and I/O
- Camera exposure and asynchronous reset control
- Trigger input and strobe output
- Frame enable input and frame output
- Two general purpose inputs and two outputs
Options
- PoCL camera power
Software
- XCAP-Lite image capture, display, and save program included
- XCAP-LTD captures video sequences to host memory
- XCAP-STD streams video to host disk drives
- XCLIB programmer libraries for custom capture and control
- PXIPL image processing, measurement, and analysis libraries
- 3rd Party software available
- Windows & Linux, 32 & 64–bit
The PIXCI® miniH2F camera link frame grabber uses internal PCI Express Mini Card slots in small computer systems. Space constraints typically require routing of cables to a side of the case or to a nearby camera. Flexible cables are used to facilitate routing.
BUS ADAPTER OPTIONS
M.2M and M.2A & E bus interface boards are now available for the PIXCI® miniH2B, minih2F, miniH2BL and miniH2FL frame grabbers. Please contact us for ordering details.
SPECIFICATIONS
| Performance (Supports the camera's maximum): | Horizontal Resolution
Vertical Resolution Frame Rate Bit Depth |
| Signal Input & Output: | Pixel clock frequencies from 20 to 85 megahertz |
| Bus Requirement: | PCI Express Mini Card slot Gen 2 or better
(Will operate in Gen 1 at reduced data rate) |
| Data Transfers: | Gen 2 data rates (409 megabytes per second)
Gen 1 data rates (200 megabytes per second) 64 bit memory addressing |
| Connectors: | Two 26 pin MDR or SDR camera link connectors
10 pin header for Trigger, Frame Enable, Strobe, and General Purpose I/O 3.3 volt LVTTL signal levels on 10 pin header |
| Power Requirements: | 12 volts at 250 milliamps |
| Dimensions: | miniH2F: 3.145 inches (70.83mm) by 2.09 inches (53.08mm)
mini PCIe: 1.055 inches (26.79mm) by 1.182 inches (30mm) |
| Weight: | 1.4 oz, 41 grams |
| Certifications: | CE Compliant
ROHS Compliant |
| EPIX Software Support: | Supported by XCAP-Lite (no charge with board purchase),
XCAP-Ltd, XCAP-Std,
XCLIB, and XCLIBIPL. |