PIXCI® Series Camera Compatibility Guide

PIXCI® Selection Guide

PIXCI® series imaging boards interface to over 1000 different camera models made by over 70 camera manufacturers. Use this guide to check XCAP software's support for your camera; click on the Camera Controls link to view the custom, camera specific, control panels. Or, use the guide to help select a new camera with the characteristics you need! (Last Updated: 25 Sep 2025)

EPIX, Inc. is continually engineering new products and expanding its support for cameras used in research, industry, and other demanding applications. Please contact us if your camera isn't listed.

Camera/Format	Resolution	Format (at dflt. res.)	Pixels	Supported By	Notes	Custom Controls	Order Code	Software
e2v ELIIXA+ 8k/4k CL	8192	20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4TX2-4B, PCI Express x4 Gen 2	Note 1	See Controls!	PIXCI-E4TX2	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4TX2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4TX2	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4G2-4B, PCI Express x4 Gen 2	Note 2	See Controls!	PIXCI-E4G2	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4G2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4G2	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® e104x4-4b, PCIe/104 x4 Gen 2	Note 3	See Controls!	PIXCI-E104X4-4B	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® e104x4-2f, PCIe/104 x4 Gen 2		See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E8DB, PCI Express x8	Note 4	See Controls!	PIXCI-E8	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4DB(Rev7+), PCI Express x4 Gen 2	Note 5	See Controls!	PIXCI-E4	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4DB, PCI Express x4	Note 6	See Controls!	PIXCI-E4	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EL1DB(Rev7+), PCI Express x1 Gen 2	Note 7	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EL1DB, PCI Express x1	Note 8	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EL1(Rev7+), PCI Express x1 Gen 2	Note 9	See Controls!	PIXCI-EL1	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EL1, PCI Express x1	Note 10	See Controls!	PIXCI-EL1	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® ECB2, ExpressCard/54	Note 11	See Controls!	PIXCI-ECB2	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® ECB1-34, ExpressCard/34	Note 12	See Controls!	PIXCI-ECB1-34	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® mf2280D(M), M.2 PCIe x4 Gen 2	Note 13	See Controls!		XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® mf2280D(F), M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® mf2280-C, Thunderbolt 3		See Controls!		XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® mf2280, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® miniH2x4F, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® miniH2F, M.2 PCIe x1 Gen 2	Note 14	See Controls!	MINIH2F	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® miniH2F, PCI Express Mini x1 Gen 2	Note 15	See Controls!	MINIH2F	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® miniH2B, M.2 PCIe x1 Gen 2	Note 16	See Controls!	MINIH2B	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® miniH2B, PCI Express Mini x1 Gen 2	Note 17	See Controls!	MINIH2B	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1mini, M.2 PCIe x1	Note 18	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1mini, PCI Express Mini x1	Note 19	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1G2-PoCL, PCI Express x1 Gen 2	Note 20	See Controls!	PIXCI-EB1G2P	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1-PoCL, PCI Express x1	Note 21	See Controls!	PIXCI-EB1P	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1G2, PCI Express x1 Gen 2	Note 22	See Controls!	PIXCI-EB1G2	XCAP XCLIB
		20.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® EB1, PCI Express x1	Note 23	See Controls!	PIXCI-EB1	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® E4, PCI Express x4		See Controls!	PIXCI-E4	XCAP XCLIB
		40.00 Klps, Line Scan	Monochrome, 12 bits	PIXCI® CL2, PCI 64 Bit	Note 24	See Controls!	PIXCI-CL2	XCAP XCLIB
e2v ELIIXA+ 8k/4k CL(8 Bit Mode)	8192	80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4TX2-4B, PCI Express x4 Gen 2	Note 1	See Controls!	PIXCI-E4TX2	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4TX2-2F, PCI Express x4 Gen 2	Note 25	See Controls!	PIXCI-E4TX2	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4G2-4B, PCI Express x4 Gen 2	Note 2	See Controls!	PIXCI-E4G2	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4G2-2F, PCI Express x4 Gen 2	Note 26	See Controls!	PIXCI-E4G2	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® e104x4-4b, PCIe/104 x4 Gen 2	Note 3	See Controls!	PIXCI-E104X4-4B	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® e104x4-2f, PCIe/104 x4 Gen 2	Note 27	See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E8DB, PCI Express x8	Note 4	See Controls!	PIXCI-E8	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4DB(Rev7+), PCI Express x4 Gen 2	Note 5	See Controls!	PIXCI-E4	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4DB, PCI Express x4	Note 6	See Controls!	PIXCI-E4	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EL1DB(Rev7+), PCI Express x1 Gen 2	Note 28	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EL1DB, PCI Express x1	Note 29	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EL1(Rev7+), PCI Express x1 Gen 2	Note 30	See Controls!	PIXCI-EL1	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EL1, PCI Express x1	Note 31	See Controls!	PIXCI-EL1	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® ECB2, ExpressCard/54	Note 32	See Controls!	PIXCI-ECB2	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® ECB1-34, ExpressCard/34	Note 33	See Controls!	PIXCI-ECB1-34	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® mf2280D(M), M.2 PCIe x4 Gen 2	Note 34	See Controls!		XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® mf2280D(F), M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® mf2280-C, Thunderbolt 3		See Controls!		XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® mf2280, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® miniH2x4F, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® miniH2F, M.2 PCIe x1 Gen 2	Note 35	See Controls!	MINIH2F	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® miniH2F, PCI Express Mini x1 Gen 2	Note 36	See Controls!	MINIH2F	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® miniH2B, M.2 PCIe x1 Gen 2	Note 37	See Controls!	MINIH2B	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® miniH2B, PCI Express Mini x1 Gen 2	Note 38	See Controls!	MINIH2B	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1mini, M.2 PCIe x1	Note 39	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1mini, PCI Express Mini x1	Note 40	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1G2-PoCL, PCI Express x1 Gen 2	Note 41	See Controls!	PIXCI-EB1G2P	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1-PoCL, PCI Express x1	Note 42	See Controls!	PIXCI-EB1P	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1G2, PCI Express x1 Gen 2	Note 43	See Controls!	PIXCI-EB1G2	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® EB1, PCI Express x1	Note 44	See Controls!	PIXCI-EB1	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
		100.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® E4, PCI Express x4	Note 45	See Controls!	PIXCI-E4	XCAP XCLIB
		80.00 Klps, Line Scan	Monochrome, 8 bits	PIXCI® CL2, PCI 64 Bit	Note 46	See Controls!	PIXCI-CL2	XCAP XCLIB
e2v ELIIXA+ 8k/4k CL Color	8192	10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4TX2-4B, PCI Express x4 Gen 2	Note 1	See Controls!	PIXCI-E4TX2	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4TX2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4TX2	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4G2-4B, PCI Express x4 Gen 2	Note 2	See Controls!	PIXCI-E4G2	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4G2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4G2	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® e104x4-4b, PCIe/104 x4 Gen 2	Note 3	See Controls!	PIXCI-E104X4-4B	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® e104x4-2f, PCIe/104 x4 Gen 2		See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E8DB, PCI Express x8	Note 4	See Controls!	PIXCI-E8	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4DB(Rev7+), PCI Express x4 Gen 2	Note 5	See Controls!	PIXCI-E4	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4DB, PCI Express x4	Note 6	See Controls!	PIXCI-E4	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EL1DB(Rev7+), PCI Express x1 Gen 2	Note 47	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EL1DB, PCI Express x1	Note 48	See Controls!	PIXCI-EL1DB	XCAP XCLIB
		40.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EL1(Rev7+), PCI Express x1 Gen 2	Note 49	See Controls!	PIXCI-EL1	XCAP XCLIB
		40.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EL1, PCI Express x1	Note 50	See Controls!	PIXCI-EL1	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® ECB2, ExpressCard/54	Note 51	See Controls!	PIXCI-ECB2	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® ECB1-34, ExpressCard/34	Note 52	See Controls!	PIXCI-ECB1-34	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® mf2280D(M), M.2 PCIe x4 Gen 2	Note 34	See Controls!		XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® mf2280D(F), M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® mf2280-C, Thunderbolt 3		See Controls!		XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® mf2280, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® miniH2x4F, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® miniH2F, M.2 PCIe x1 Gen 2		See Controls!	MINIH2F	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® miniH2F, PCI Express Mini x1 Gen 2		See Controls!	MINIH2F	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® miniH2B, M.2 PCIe x1 Gen 2	Note 53	See Controls!	MINIH2B	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® miniH2B, PCI Express Mini x1 Gen 2	Note 53	See Controls!	MINIH2B	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1mini, M.2 PCIe x1	Note 54	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1mini, PCI Express Mini x1	Note 54	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1G2-PoCL, PCI Express x1 Gen 2	Note 20	See Controls!	PIXCI-EB1G2P	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1-PoCL, PCI Express x1	Note 55	See Controls!	PIXCI-EB1P	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1G2, PCI Express x1 Gen 2	Note 22	See Controls!	PIXCI-EB1G2	XCAP XCLIB
		10.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® EB1, PCI Express x1	Note 56	See Controls!	PIXCI-EB1	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
		50.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® E4, PCI Express x4		See Controls!	PIXCI-E4	XCAP XCLIB
		40.00 Klps, Line Scan	Color, 8+8+8 bits	PIXCI® CL2, PCI 64 Bit	Note 57	See Controls!	PIXCI-CL2	XCAP XCLIB
e2v Lince5M Color Dev. Kit	2560x2048	63.60 fps, Progressive	Color, 12+12+12 bits, square	PIXCI® E4TX2-4B, PCI Express x4 Gen 2	Note 58	See Controls!	PIXCI-E4TX2	XCAP XCLIB
				PIXCI® E4TX2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4TX2	XCAP XCLIB
				PIXCI® E4G2-4B, PCI Express x4 Gen 2	Note 59	See Controls!	PIXCI-E4G2	XCAP XCLIB
				PIXCI® E4G2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4G2	XCAP XCLIB
				PIXCI® e104x4-4b, PCIe/104 x4 Gen 2	Note 60	See Controls!	PIXCI-E104X4-4B	XCAP XCLIB
				PIXCI® e104x4-2f, PCIe/104 x4 Gen 2		See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
				PIXCI® E8DB, PCI Express x8	Note 61	See Controls!	PIXCI-E8	XCAP XCLIB
				PIXCI® E4DB(Rev7+), PCI Express x4 Gen 2	Note 62	See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® E4DB, PCI Express x4	Note 63	See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® EL1DB(Rev7+), PCI Express x1 Gen 2	Note 64	See Controls!	PIXCI-EL1DB	XCAP XCLIB
				PIXCI® EL1DB, PCI Express x1	Note 65	See Controls!	PIXCI-EL1DB	XCAP XCLIB
				PIXCI® EL1(Rev7+), PCI Express x1 Gen 2	Note 66	See Controls!	PIXCI-EL1	XCAP XCLIB
				PIXCI® EL1, PCI Express x1	Note 67	See Controls!	PIXCI-EL1	XCAP XCLIB
				PIXCI® ECB2, ExpressCard/54	Note 68	See Controls!	PIXCI-ECB2	XCAP XCLIB
				PIXCI® ECB1-34, ExpressCard/34	Note 69	See Controls!	PIXCI-ECB1-34	XCAP XCLIB
				PIXCI® mf2280D(M), M.2 PCIe x4 Gen 2	Note 13	See Controls!		XCAP XCLIB
				PIXCI® mf2280D(F), M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® mf2280-C, Thunderbolt 3		See Controls!		XCAP XCLIB
				PIXCI® mf2280, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2x4F, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2F, M.2 PCIe x1 Gen 2	Note 70	See Controls!	MINIH2F	XCAP XCLIB
				PIXCI® miniH2F, PCI Express Mini x1 Gen 2	Note 71	See Controls!	MINIH2F	XCAP XCLIB
				PIXCI® miniH2B, M.2 PCIe x1 Gen 2	Note 72	See Controls!	MINIH2B	XCAP XCLIB
				PIXCI® miniH2B, PCI Express Mini x1 Gen 2	Note 73	See Controls!	MINIH2B	XCAP XCLIB
				PIXCI® EB1mini, M.2 PCIe x1	Note 74	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
				PIXCI® EB1mini, PCI Express Mini x1	Note 75	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
				PIXCI® EB1G2-PoCL, PCI Express x1 Gen 2	Note 76	See Controls!	PIXCI-EB1G2P	XCAP XCLIB
				PIXCI® EB1-PoCL, PCI Express x1	Note 77	See Controls!	PIXCI-EB1P	XCAP XCLIB
				PIXCI® EB1G2, PCI Express x1 Gen 2	Note 78	See Controls!	PIXCI-EB1G2	XCAP XCLIB
				PIXCI® EB1, PCI Express x1	Note 79	See Controls!	PIXCI-EB1	XCAP XCLIB
				PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
				PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® E4, PCI Express x4		See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® CL2, PCI 64 Bit	Note 80	See Controls!	PIXCI-CL2	XCAP XCLIB
e2v Lince5M Dev. Kit	2560x2048	63.60 fps, Progressive	Monochrome, 12 bits, square	PIXCI® E4TX2-4B, PCI Express x4 Gen 2	Note 58	See Controls!	PIXCI-E4TX2	XCAP XCLIB
				PIXCI® E4TX2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4TX2	XCAP XCLIB
				PIXCI® E4G2-4B, PCI Express x4 Gen 2	Note 59	See Controls!	PIXCI-E4G2	XCAP XCLIB
				PIXCI® E4G2-2F, PCI Express x4 Gen 2		See Controls!	PIXCI-E4G2	XCAP XCLIB
				PIXCI® e104x4-4b, PCIe/104 x4 Gen 2	Note 60	See Controls!	PIXCI-E104X4-4B	XCAP XCLIB
				PIXCI® e104x4-2f, PCIe/104 x4 Gen 2		See Controls!	PIXCI-E104X4-2F	XCAP XCLIB
				PIXCI® E8DB, PCI Express x8	Note 61	See Controls!	PIXCI-E8	XCAP XCLIB
				PIXCI® E4DB(Rev7+), PCI Express x4 Gen 2	Note 62	See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® E4DB, PCI Express x4	Note 63	See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® EL1DB(Rev7+), PCI Express x1 Gen 2	Note 64	See Controls!	PIXCI-EL1DB	XCAP XCLIB
				PIXCI® EL1DB, PCI Express x1	Note 65	See Controls!	PIXCI-EL1DB	XCAP XCLIB
				PIXCI® EL1(Rev7+), PCI Express x1 Gen 2	Note 66	See Controls!	PIXCI-EL1	XCAP XCLIB
				PIXCI® EL1, PCI Express x1	Note 67	See Controls!	PIXCI-EL1	XCAP XCLIB
				PIXCI® ECB2, ExpressCard/54	Note 68	See Controls!	PIXCI-ECB2	XCAP XCLIB
				PIXCI® ECB1-34, ExpressCard/34	Note 69	See Controls!	PIXCI-ECB1-34	XCAP XCLIB
				PIXCI® mf2280D(M), M.2 PCIe x4 Gen 2	Note 13	See Controls!		XCAP XCLIB
				PIXCI® mf2280D(F), M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® mf2280-C, Thunderbolt 3		See Controls!		XCAP XCLIB
				PIXCI® mf2280, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2x4F, M.2 PCIe x4 Gen 2		See Controls!		XCAP XCLIB
				PIXCI® miniH2F, M.2 PCIe x1 Gen 2	Note 70	See Controls!	MINIH2F	XCAP XCLIB
				PIXCI® miniH2F, PCI Express Mini x1 Gen 2	Note 71	See Controls!	MINIH2F	XCAP XCLIB
				PIXCI® miniH2B, M.2 PCIe x1 Gen 2	Note 72	See Controls!	MINIH2B	XCAP XCLIB
				PIXCI® miniH2B, PCI Express Mini x1 Gen 2	Note 73	See Controls!	MINIH2B	XCAP XCLIB
				PIXCI® EB1mini, M.2 PCIe x1	Note 74	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
				PIXCI® EB1mini, PCI Express Mini x1	Note 75	See Controls!	PIXCI-EB1MINI	XCAP XCLIB
				PIXCI® EB1G2-PoCL, PCI Express x1 Gen 2	Note 76	See Controls!	PIXCI-EB1G2P	XCAP XCLIB
				PIXCI® EB1-PoCL, PCI Express x1	Note 77	See Controls!	PIXCI-EB1P	XCAP XCLIB
				PIXCI® EB1G2, PCI Express x1 Gen 2	Note 78	See Controls!	PIXCI-EB1G2	XCAP XCLIB
				PIXCI® EB1, PCI Express x1	Note 79	See Controls!	PIXCI-EB1	XCAP XCLIB
				PIXCI® E8, PCI Express x8		See Controls!	PIXCI-E8	XCAP XCLIB
				PIXCI® E4(Rev7+), PCI Express x4 Gen 2		See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® E4, PCI Express x4		See Controls!	PIXCI-E4	XCAP XCLIB
				PIXCI® CL2, PCI 64 Bit	Note 80	See Controls!	PIXCI-CL2	XCAP XCLIB

Note 1. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4TX2-4B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® E4TX2-4B Frame Grabber.

Note 2. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4G2-4B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® E4G2-4B Frame Grabber. Consider a PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 3. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® e104x4-4b Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® e104x4-4b Frame Grabber. Consider a PIXCI® e104x4-2f frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 4. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E8DB Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® E8DB Frame Grabber. Consider a PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 5. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® E4DB(Rev7+) Frame Grabber. Consider a PIXCI® E4(Rev7+), or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 6. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4DB Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® E4DB Frame Grabber. Consider a PIXCI® E4, or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 7. The PIXCI® EL1DB(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® EL1DB(Rev7+) Frame Grabber without reducing the cameras' bits per pixel. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E4DB, PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB(Rev7+) Frame Grabber. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 8. The PIXCI® EL1DB Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® E4DB, PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 9. The PIXCI® EL1(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture taps (channels) or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1(Rev7+) Frame Grabber only supports the Base, Medium, and Full Camera Link modes.

Note 10. The PIXCI® EL1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture taps (channels) or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1 Frame Grabber only supports the Base, Medium, and Full Camera Link modes.

Note 11. The PIXCI® ECB2 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/54 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the ExpressCard/54 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB2 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB2 Frame Grabber. Consider a PIXCI® EC1 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 12. The PIXCI® ECB1-34 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/34 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the ExpressCard/34 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB1-34 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB1-34 Frame Grabber.

Note 13. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® mf2280D (Medium-section) Frame Grabber only supports the Base and Medium Camera Link modes.

Note 14. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The capture taps (channels) or bits per pixel must be reduced to allow operation within the limits of the M.2 PCIe x1 Gen 2 bus/interface. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.)

Note 15. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The capture taps (channels) or bits per pixel must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 bus/interface. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280 frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative.

Note 16. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® miniH2B Frame Grabber without reducing the cameras' bits per pixel. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® miniH2B Frame Grabber.

Note 17. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® miniH2B Frame Grabber without reducing the cameras' bits per pixel. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280D (Medium-section) frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® miniH2B Frame Grabber.

Note 18. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the M.2 PCIe x1 bus/interface. (The M.2 PCIe x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1mini Frame Grabber.

Note 19. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the PCI Express Mini x1 bus/interface. (The PCI Express Mini x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® miniH2B frame grabber, using the PCI Express Mini x1 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1mini Frame Grabber.

Note 20. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2-PoCL Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1G2-PoCL Frame Grabber. Consider a PIXCI® E4, or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 21. The PIXCI® EB1-PoCL Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1-PoCL Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1-PoCL Frame Grabber.

Note 22. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1G2 Frame Grabber. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 23. The PIXCI® EB1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EB1G2, PIXCI® E4, or PIXCI® E8 frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, or PCI Express x8 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1 Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 24. The PIXCI® CL2 Frame Grabber's capture bandwidth is limited by the computer's PCI 64 Bit bus/interface. The capture taps (channels) or bits per pixel must be reduced to allow operation within the limits of the PCI 64 Bit bus/interface. (The 64-bit 66 MHz PCI bus has, on most computers, an effective maximum bandwidth of approximately 480 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® CL2 Frame Grabber only supports the Base, Medium, and Full Camera Link modes.

Note 25. The PIXCI® E4TX2-2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® E4TX2-2F Frame Grabber without reducing the cameras' taps (channels). (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 26. The PIXCI® E4G2-2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® E4G2-2F Frame Grabber without reducing the cameras' taps (channels). (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 27. The PIXCI® e104x4-2f Frame Grabber's capture bandwidth is limited by the computer's PCIe/104 x4 Gen 2 bus/interface. The bandwidth is sufficient for a single camera, but may not be sufficient for multiple cameras sharing a single PIXCI® e104x4-2f Frame Grabber without reducing the cameras' taps (channels). (The PCI Express x4 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 1390 MByte/sec.)

Note 28. The PIXCI® EL1DB(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB(Rev7+) Frame Grabber. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 29. The PIXCI® EL1DB Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 30. The PIXCI® EL1(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1(Rev7+) Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1(Rev7+) Frame Grabber.

Note 31. The PIXCI® EL1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1 Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1 Frame Grabber.

Note 32. The PIXCI® ECB2 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/54 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the ExpressCard/54 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB2 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB2 Frame Grabber. Consider a PIXCI® EC1 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 33. The PIXCI® ECB1-34 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/34 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the ExpressCard/34 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB1-34 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB1-34 Frame Grabber.

Note 34. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® mf2280D (Medium-section) Frame Grabber only supports the Base and Medium Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® mf2280D (Medium-section) Frame Grabber.

Note 35. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the M.2 PCIe x1 Gen 2 bus/interface. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.)

Note 36. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 bus/interface. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280 frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative.

Note 37. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the M.2 PCIe x1 Gen 2 bus/interface. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® miniH2B Frame Grabber.

Note 38. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 bus/interface. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280D (Medium-section) frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® miniH2B Frame Grabber.

Note 39. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the M.2 PCIe x1 bus/interface. (The M.2 PCIe x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1mini Frame Grabber.

Note 40. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express Mini x1 bus/interface. (The PCI Express Mini x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® miniH2B frame grabber, using the PCI Express Mini x1 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1mini Frame Grabber.

Note 41. The PIXCI® EB1G2-PoCL Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2-PoCL Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1G2-PoCL Frame Grabber. Consider a PIXCI® E4, or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 42. The PIXCI® EB1-PoCL Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1-PoCL Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1-PoCL Frame Grabber.

Note 43. The PIXCI® EB1G2 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1G2 Frame Grabber. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 44. The PIXCI® EB1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EB1G2, PIXCI® E4, or PIXCI® E8 frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, or PCI Express x8 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1 Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 45. The PIXCI® E4 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x4 bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI Express x4 bus/interface. (The PCI Express x4 interface has, on most computers, an effective maximum bandwidth of approximately 777 MByte/sec.) Consider a PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative.

Note 46. The PIXCI® CL2 Frame Grabber's capture bandwidth is limited by the computer's PCI 64 Bit bus/interface. The capture taps (channels) must be reduced to allow operation within the limits of the PCI 64 Bit bus/interface. (The 64-bit 66 MHz PCI bus has, on most computers, an effective maximum bandwidth of approximately 480 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® CL2 Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® CL2 Frame Grabber.

Note 47. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB(Rev7+) Frame Grabber. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 48. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1DB Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 49. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1(Rev7+) Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1(Rev7+) Frame Grabber.

Note 50. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1 Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EL1 Frame Grabber.

Note 51. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB2 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB2 Frame Grabber. Consider a PIXCI® EC1 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 52. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB1-34 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® ECB1-34 Frame Grabber.

Note 53. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® miniH2B Frame Grabber.

Note 54. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1mini Frame Grabber.

Note 55. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1-PoCL Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1-PoCL Frame Grabber.

Note 56. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1 Frame Grabber only supports the Base Camera Link mode. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® EB1 Frame Grabber. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 57. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® CL2 Frame Grabber only supports the Base, Medium, and Full Camera Link modes. The camera's specified taps (channels) and/or line rate has been reduced to allow operation within the modes supported by the PIXCI® CL2 Frame Grabber.

Note 58. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4TX2-4B Frame Grabber only supports the Base Camera Link mode.

Note 59. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4G2-4B Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 60. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® e104x4-4b Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® e104x4-2f frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 61. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E8DB Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 62. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® E4(Rev7+), or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 63. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® E4DB Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® E4, or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 64. The PIXCI® EL1DB(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB(Rev7+) Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 65. The PIXCI® EL1DB Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® E8DB, or PIXCI® E4G2-4B frame grabber, using the PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1DB Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 66. The PIXCI® EL1(Rev7+) Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1(Rev7+) Frame Grabber only supports the Base, Medium, and Full Camera Link modes.

Note 67. The PIXCI® EL1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, PCI Express x8, or PCI Express x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EL1 Frame Grabber only supports the Base, Medium, and Full Camera Link modes.

Note 68. The PIXCI® ECB2 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/54 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the ExpressCard/54 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB2 Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® EC1 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 69. The PIXCI® ECB1-34 Frame Grabber's capture bandwidth is limited by the computer's ExpressCard/34 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the ExpressCard/34 bus/interface. (The ExpressCard (PCI Express x1) interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® ECB1-34 Frame Grabber only supports the Base Camera Link mode.

Note 70. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the M.2 PCIe x1 Gen 2 bus/interface. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.)

Note 71. The PIXCI® miniH2F Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 bus/interface. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280 frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative.

Note 72. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the M.2 PCIe x1 Gen 2 bus/interface. (The M.2 PCIe x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode.

Note 73. The PIXCI® miniH2B Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express Mini x1 Gen 2 bus/interface. (The PCI Express Mini x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) Consider a PIXCI® mf2280D (Medium-section) frame grabber, using the M.2 PCIe x4 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® miniH2B Frame Grabber only supports the Base Camera Link mode.

Note 74. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's M.2 PCIe x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the M.2 PCIe x1 bus/interface. (The M.2 PCIe x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode.

Note 75. The PIXCI® EB1mini Frame Grabber's capture bandwidth is limited by the computer's PCI Express Mini x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express Mini x1 bus/interface. (The PCI Express Mini x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® miniH2B frame grabber, using the PCI Express Mini x1 Gen 2 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1mini Frame Grabber only supports the Base Camera Link mode.

Note 76. The PIXCI® EB1G2-PoCL Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2-PoCL Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® E4, or PIXCI® E8 frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 77. The PIXCI® EB1-PoCL Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1-PoCL Frame Grabber only supports the Base Camera Link mode.

Note 78. The PIXCI® EB1G2 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 Gen 2 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 Gen 2 bus/interface. (The PCI Express x1 Gen 2 interface has, on most computers, an effective maximum bandwidth of approximately 413 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1G2 Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® EL1(Rev7+), PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 79. The PIXCI® EB1 Frame Grabber's capture bandwidth is limited by the computer's PCI Express x1 bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI Express x1 bus/interface. (The PCI Express x1 interface has, on most computers, an effective maximum bandwidth of approximately 190 MByte/sec.) Consider a PIXCI® EB1G2, PIXCI® E4, or PIXCI® E8 frame grabber, using the PCI Express x1 Gen 2, PCI Express x4, or PCI Express x8 bus/interface, as an alternative. The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® EB1 Frame Grabber only supports the Base Camera Link mode. Consider a PIXCI® EL1, PIXCI® E4, PIXCI® E8, or PIXCI® E4G2-2F frame grabber as an alternative, supporting all of the camera's Camera Link modes.

Note 80. The PIXCI® CL2 Frame Grabber's capture bandwidth is limited by the computer's PCI 64 Bit bus/interface. The capture resolution (AOI), taps (channels), or bits per pixel must be reduced to allow operation within the limits of the PCI 64 Bit bus/interface. (The 64-bit 66 MHz PCI bus has, on most computers, an effective maximum bandwidth of approximately 480 MByte/sec.) The camera can operate in Base, Medium, Full, or 80-Bit Camera Link modes; the PIXCI® CL2 Frame Grabber only supports the Base, Medium, and Full Camera Link modes.